am i missing something?

Software updates will be broadcasting for the following products within the
next month:-

HD & HDR-FOX T2, week commencing the 18th of October
HD-FOX T2: Single Tuner PVR, with standard PVR features (new download

seen nothing!

--

John the West Ham Fan

On Fri, 22 Oct 2010 14:58:26 +0100, "housetrained"
wrote:

Software updates will be broadcasting for the following products within the
next month:-

HD & HDR-FOX T2, week commencing the 18th of October
HD-FOX T2: Single Tuner PVR, with standard PVR features (new download

seen nothing!

Someone in this newsgroup has suggested that Humax forgot to book a slot
on the Engineering Channel for the upgrades.

--
Peter Duncanson
(in uk.tech.digital-tv)

In message om,
housetrained writes
Software updates will be broadcasting for the following products within
the next month:-

HD & HDR-FOX T2, week commencing the 18th of October
HD-FOX T2: Single Tuner PVR, with standard PVR features (new download

seen nothing!

Irrelevant, I know, but you can download them if you want.
--
Ian

"Ian" wrote in message
news
In message om,
housetrained writes
Software updates will be broadcasting for the following products within
the next month:-

HD & HDR-FOX T2, week commencing the 18th of October
HD-FOX T2: Single Tuner PVR, with standard PVR features (new download

seen nothing!

Irrelevant, I know, but you can download them if you want.
--
Ian

Yes, I want. Been on http://www.humaxdirect.co.uk/support.asp but can't see
anything allowing the download. Do you know how I get it?
TIA
John

On Fri, 22 Oct 2010 17:13:12 +0100, "housetrained"
wrote:

"Ian" wrote in message
news
In message om,
housetrained writes
Software updates will be broadcasting for the following products within
the next month:-

HD & HDR-FOX T2, week commencing the 18th of October
HD-FOX T2: Single Tuner PVR, with standard PVR features (new download

seen nothing!

Irrelevant, I know, but you can download them if you want.
--
Ian

Yes, I want. Been on http://www.humaxdirect.co.uk/support.asp but can't see
anything allowing the download. Do you know how I get it?
TIA
Try this:
http://www.humaxdigital.com/uk/suppo...oadcenter.aspx

Choosing: Digital Set-top Box | Terrestrial | HD-FOX T2

leads to this page for the software download for the HD-FOX T2:
http://www.humaxdigital.com/uk/suppo...tegory_seq=181


--
Peter Duncanson
(in uk.tech.digital-tv)

Peter Duncanson wrote:

leads to this page for the software download for the HD-FOX T2:
http://www.humaxdigital.com/uk/suppo...tegory_seq=181

Do you reckon this is suitable for the HDR-FOX T2 as well? Strangely,
the HDR isn't listed on Humax's Download Centre dropdown boxes.

STeveT

In message , Steve Thackery
writes
Peter Duncanson wrote:

leads to this page for the software download for the HD-FOX T2:

http://www.humaxdigital.com/uk/suppo...el.aspx?catego
ry_seq=181

Do you reckon this is suitable for the HDR-FOX T2 as well? Strangely,
the HDR isn't listed on Humax's Download Centre dropdown boxes.

STeveT


http://beta.humaxonline.co.uk/downloads
--
Ian

Ian wrote:

http://beta.humaxonline.co.uk/downloads

That's great - thanks Ian.

These betas definitely seem to be ahead of the "official" versions
which were due to be broadcast this week. I'm happy to run beta
software, so will give then a try.

Thanks again,

STeveT

"Steve Thackery" wrote in message
...
Ian wrote:

http://beta.humaxonline.co.uk/downloads

That's great - thanks Ian.

These betas definitely seem to be ahead of the "official" versions which
were due to be broadcast this week. I'm happy to run beta software, so
will give then a try.



So far my experience with the HD Fox-T2 single tuner PVR download hasn't
been to happy, some of the problems I've encountered so far have been.. it
intermittently informs me that the USB2 device has been removed (the only
way to restore it's is by switching the receiver off and on again) not very
good in the middle of recording a programme.. occasional complete lockup,
necessitating unplugging from the mains.. no visual indication whatsoever on
the receiver that it's actually in record mode.. pressing the V-format
button 'always' results in a lockup, which again can only be cured by
disconnecting the power, also even the SD .ts recordings are not recognized
on any other device or PC player, which IMV makes the use of a small
portable HDD drive pretty pointless really (my £50.00 Grundig 3 USB recorder
is much better in this respect) perhaps you could let me know how you get
on, I'd be interested to hear.

thanks Peter. Downloaded and followed instructions but nothing happens. What
would the 'root directory' be. I just copied the file to a USB stick after
altering the name?
TIA
John


"Peter Duncanson" wrote in message
news
On Fri, 22 Oct 2010 17:13:12 +0100, "housetrained"
wrote:

"Ian" wrote in message
news
In message om,
housetrained writes
Software updates will be broadcasting for the following products within
the next month:-

HD & HDR-FOX T2, week commencing the 18th of October
HD-FOX T2: Single Tuner PVR, with standard PVR features (new download

seen nothing!

Irrelevant, I know, but you can download them if you want.
--
Ian

Yes, I want. Been on http://www.humaxdirect.co.uk/support.asp but can't
see
anything allowing the download. Do you know how I get it?
TIA
Try this:
http://www.humaxdigital.com/uk/suppo...oadcenter.aspx

Choosing: Digital Set-top Box | Terrestrial | HD-FOX T2

leads to this page for the software download for the HD-FOX T2:
http://www.humaxdigital.com/uk/suppo...tegory_seq=181


--
Peter Duncanson
(in uk.tech.digital-tv)