A Home cinema forum. HomeCinemaBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HomeCinemaBanter forum » Home cinema newsgroups » UK digital tv
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Humax PVR9200T - new software available



 
 
Thread Tools Display Modes
  #11  
Old June 30th 07, 12:30 PM posted to uk.tech.digital-tv
Nigel Whitfield
external usenet poster
 
Posts: 90
Default Humax PVR9200T - new software available

On 29 Jun, 13:45, "Dr Zoidberg"
wrote:
Nigel Whitfield wrote:
So presumably this could show up in a later version of software?

Do you have any links for what exactly is included in the spec?


That is the plan, yes - though I don't have the details of when things
will be implemented.

You can find the various different features and groups starting on
page 10 of this document:

http://www.freeview.co.uk/docs/manufacturer_licence.pdf

Nigel.

  #12  
Old June 30th 07, 12:38 PM posted to uk.tech.digital-tv
Nigel Whitfield
external usenet poster
 
Posts: 90
Default Humax PVR9200T - new software available

On 30 Jun, 10:27, Prometheus wrote:
I regularly see the BBC 'now' info on DVB-t claiming the programme which
should be on to be on whilst the preceding programme is still on,
sometimes overrunning by ten minutes, perhaps even cancelled. The
NOW/NEXT and EPG are little more than a random guess.


Are you talking about the real information, checked by looking at the
stream, or the information displayed to you by your box?

There's a subtle difference; the indication that a program has started
is supposed to be controlled by the EIT present/following flags,
indicating the running status, and you should be being told that
what's broadcast is the item that's marked as currently running.

But it's quite possible for the software in the box to simply look at
the time, and display in the info box the data that it has in its
memory corresponding to that time slot. It's a sloppy way of doing it,
perhaps, but it can be done.

On some kit (the Toppy), you can have a choice here - you can use the
broadcast EPG, or you can use an uploaded one, and typically when you
do the latter, what you'll see is based on the time, not the actual
running status, because you don't have a way of matching the two up.

A box should display info based on running status, rather than time -
and with Freeview Playback the running status is supposed to be
derived from the playout systems, I gather, and then fed to the
central collator for broadcast.

But it's perfectly possible for a box to have been cobbled together
with code that looks at the time instead, I presume. With a bit of
thought, you should be able to devise a test to check exactly what
it's doing.

Nigel.

  #13  
Old June 30th 07, 12:41 PM posted to uk.tech.digital-tv
Mark Carver
external usenet poster
 
Posts: 6,528
Default Humax PVR9200T - new software available

Prometheus wrote:t.

I regularly see the BBC 'now' info on DVB-t claiming the programme which
should be on to be on whilst the preceding programme is still on,
sometimes overrunning by ten minutes, perhaps even cancelled. The
NOW/NEXT and EPG are little more than a random guess.


AIUI the BBC send EIT triggers to the Freeview and Sky EPGs at the *actual*
programme junctions, these are directly driven from their playout computer
(the same data is mirrored for PDC on analogue). Sky+ by whatever means is
able to use these (as IME Sky 'Autoview'), and extend recordings accordingly.
Some Freeview PVRs do the same. My Sony RDR-HXD710 certainly does, my Toppy
certainly doesn't.
It also depends on the design and sofware of the STB whether these updates are
reflected in the basic N+N banners.


--
Mark
Please replace invalid and invalid with gmx and net to reply.
  #14  
Old June 30th 07, 02:11 PM posted to uk.tech.digital-tv
Dr Zoidberg
external usenet poster
 
Posts: 144
Default Humax PVR9200T - new software available

Nigel Whitfield wrote:
On 29 Jun, 13:45, "Dr Zoidberg"
wrote:
Nigel Whitfield wrote:
So presumably this could show up in a later version of software?

Do you have any links for what exactly is included in the spec?


That is the plan, yes - though I don't have the details of when things
will be implemented.

You can find the various different features and groups starting on
page 10 of this document:

http://www.freeview.co.uk/docs/manufacturer_licence.pdf

Thanks , I'll have a read through later

--
Alex

"I laugh in the face of danger. Then I hide until it goes away"

www.drzoidberg.co.uk www.ebayfaq.co.uk


  #15  
Old June 30th 07, 05:49 PM posted to uk.tech.digital-tv
Piers James[_2_]
external usenet poster
 
Posts: 20
Default Humax PVR9200T - new software available

It's worth uploading the new software for a couple of bug fixes and 32x fast
forward, but Accurate Recording basically doesn't work. I don't know if it
is down to Humax's software, the broadcasters or both.

I would stick with auto padding for now, and wait for Group 2 FB functions,
which should include Series Link.

There's some good FAQs on all of this over at www.hummy.org.uk.


"Paul Schofield" paul_AT_sonifex_DOT_co_DOT_uk wrote in message
...

"Max Demian" wrote in message
...
"Dr Zoidberg" wrote in message
...
From Humax's website


Version PGXTF 1.00.15, from
http://www.humaxdigital.com/hcsa/Dow.../PVR-9200T.asp

Well worth having. Don't forget to do a Default Setting from the STB menu
afterward.


Says it implements Freeview Playback - Group 1.

Does anyone have any idea what group 1 means? Are all channels
broadcasting
the necessary info or is it a clever use of transmission tags to tell when
programmes stop & start?


--
Paul Schofield






  #16  
Old June 30th 07, 10:26 PM posted to uk.tech.digital-tv
Hawkins
external usenet poster
 
Posts: 121
Default Humax PVR9200T - new software available

I checked out the accurate recording function for Dr Who this evening. The
now and next changed as the previous programme finished. My 9200T was
powered up and ready to go but recording did not start at that point. I sat
with my finger ready on the instant record button but the recording started
as soon as the Dr Who prog. started, this was a few minutes after the
scheduled start time. At the end of the programme recording stopped at the
end of the episode but the short "teaser" for the next series was cut off.
So it would appear that "accurate recording" works and that it is dependent
on start/ stop signals being sent out and these are probably being triggered
by morons with no imagination. I will go back to the previous padding method
for the foreseeable future.

Richard.

"Piers James" wrote in message
...
It's worth uploading the new software for a couple of bug fixes and 32x
fast forward, but Accurate Recording basically doesn't work. I don't know
if it is down to Humax's software, the broadcasters or both.

I would stick with auto padding for now, and wait for Group 2 FB
functions, which should include Series Link.

There's some good FAQs on all of this over at www.hummy.org.uk.


"Paul Schofield" paul_AT_sonifex_DOT_co_DOT_uk wrote in message
...

"Max Demian" wrote in message
...
"Dr Zoidberg" wrote in message
...
From Humax's website

Version PGXTF 1.00.15, from
http://www.humaxdigital.com/hcsa/Dow.../PVR-9200T.asp

Well worth having. Don't forget to do a Default Setting from the STB
menu
afterward.


Says it implements Freeview Playback - Group 1.

Does anyone have any idea what group 1 means? Are all channels
broadcasting
the necessary info or is it a clever use of transmission tags to tell
when
programmes stop & start?


--
Paul Schofield








  #17  
Old July 2nd 07, 09:18 AM posted to uk.tech.digital-tv
WCZ
external usenet poster
 
Posts: 62
Default Humax PVR9200T - new software available


"Mike Henry" wrote in message
...
In , "Matti
Lamprhey" wrote:

"Mike Henry" wrote...
"Matti Lamprhey" wrote:

Both BBC recordings missed the start of the programmes and also
the ends! This is useless, of course. I assume the problem lies
with the EPG rather than with the Humax software.

Nope. This isn't a new issue. The problem lies with the UK
broadcasters deliberately and systematically running programmes
outside their timeslots as a "spoiler tactic" against a competing
channel. ...


Tempting to believe this.


It's been going on for years.

If the BBC were doing what you describe here,
though, it would also be in their interests to adjust the EPG to reflect
these early start times.


They adjust the now+next data on satellite. And presumably on DTT too as
they are fed from the same system. People watching live, or recording on
a Sky+, or a DTT PVR which looks for the data, or a PDC VCR may get the
whole programme. Everyone else doesn't.


The Diana gig last night overran by the looks of it as Medium was half an
hour late which I had set to record. I haven't upgraded the Hummy yet but I
did spot that the now/next information had been correctly changed by the BBC
but the entry in the EPG was still showing the old time.


  #18  
Old July 2nd 07, 02:51 PM posted to uk.tech.digital-tv
RayC
external usenet poster
 
Posts: 1
Default Humax PVR9200T - new software available


"WCZ" wrote in message
...

"Mike Henry" wrote in message
...
In , "Matti
Lamprhey" wrote:

"Mike Henry" wrote...
"Matti Lamprhey" wrote:

Both BBC recordings missed the start of the programmes and also
the ends! This is useless, of course. I assume the problem lies
with the EPG rather than with the Humax software.

Nope. This isn't a new issue. The problem lies with the UK
broadcasters deliberately and systematically running programmes
outside their timeslots as a "spoiler tactic" against a competing
channel. ...

Tempting to believe this.


It's been going on for years.

If the BBC were doing what you describe here,
though, it would also be in their interests to adjust the EPG to reflect
these early start times.


They adjust the now+next data on satellite. And presumably on DTT too as
they are fed from the same system. People watching live, or recording on
a Sky+, or a DTT PVR which looks for the data, or a PDC VCR may get the
whole programme. Everyone else doesn't.


The Diana gig last night overran by the looks of it as Medium was half an
hour late which I had set to record. I haven't upgraded the Hummy yet but
I did spot that the now/next information had been correctly changed by the
BBC but the entry in the EPG was still showing the old time.


My shining new Humax, shipped with the latest software, shut off the Diana
recording at the original finish time - very disappointing.

Sorry to be a (Newby) pest, but what is now/next information?


  #19  
Old July 5th 07, 10:15 AM posted to uk.tech.digital-tv
Steve Thackery
external usenet poster
 
Posts: 113
Default Humax PVR9200T - new software available

This means that the broadcasters are adhering to the published EPG or else
box manufacturers are lying about the current capability of their
products.


No it doesn't!! It means the box meets the test specification for Freeview
Playback, that's all.

The service requires TWO components: the appropriate protocols from the
broadcaster, and the appropriate functionality in the PVR.

At the moment the broadcasters are NOT playing ball.

Steve


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Humax PVR9200T Docka UK digital tv 5 February 11th 07 04:28 PM
Ir extender and humax pvr9200t [email protected] UK digital tv 0 January 9th 06 05:29 PM
HUMAX PVR9200T Matt UK digital tv 8 November 2nd 05 05:11 PM
Humax PVR9200T anyone? Clem Dye UK digital tv 29 October 29th 05 11:04 PM
Humax PVR9200T Vin UK digital tv 31 October 6th 05 08:21 PM


All times are GMT +1. The time now is 04:00 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright ©2004-2021 HomeCinemaBanter.
The comments are property of their posters.