![]() |
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
My local tv station will begin to broadcast HD signal soon, and I got an
anolog TV. Do I need to buy some kind of HD adapter/receiver inorder to get the signal? If I don't buy it, can I still be able to get the signal through the analog TV? Thanks |
|
#2
|
|||
|
|||
|
If I understand you correctly, the HD signals will be in *addition* to the
regular analog signals. You can keep your old set and everything remains the same. However, to receive the extra HD signals, you will need an extra cost set-top receiver, as well as a TV that can properly display the HD signal. If/when they are switching from an analog to a *digital* signal, you will need a *digital* set-top receiver, but you should be able to keep your old TV. Not all digital signals are HD... -- Dave (Since 1962) -=Perfect Picture. Perfect Sound Live every moment in High Definition=- Richard wrote: My local tv station will begin to broadcast HD signal soon, and I got an anolog TV. Do I need to buy some kind of HD adapter/receiver inorder to get the signal? If I don't buy it, can I still be able to get the signal through the analog TV? Thanks |
|
#3
|
|||
|
|||
|
Richard wrote:
My local tv station will begin to broadcast HD signal soon, and I got an anolog TV. Do I need to buy some kind of HD adapter/receiver inorder to get the signal? If I don't buy it, can I still be able to get the signal through the analog TV? Thanks The analog TV format in use for the last half century is NTSC. You can't view digital signals on a NTSC only TV without a converter. Note that existing digital satellite receivers (Direct TV and Dish Network) and "digital cable" converters are already accomplishing a digital to NTSC conversion, The more recent digital format is ATSC with 480, 729 or 1080 vertical resolutions. These resolutions are typically followed by "i" for interlaced (like an NTSC signal) or "P" for progressive (like a CRT computer monitor). Like NTSC TV, interlaced signals generate alternate lines across the screen and THEN make a second pass to fill in the gaps. Progressive scans generate each line of the display in order in a single pass. Large and mid size televisions manufactured for sale in the US have been required to have ATSC tuners IF they have NTSC tuners for about a year. Smaller TVs should be appearing in retailers SOON. "Monitors" often labeled "HDTV Ready" aren't required to have either ATSC OR NTSC tuners. TVs and monitors CAN be "digital" Standard Definition (SD) devices capable of ONLY 480i ATSC display. A TV or monitor should have 720i, 720p OR 1080i capability to have the "HD" label. Most broadcasters in the US will duplicate their ATSC programming in NTSC format (downgraded to lower resolution where applicable) for the remainder of 2007, all of 2008 and the first several weeks of 2009. NTSC format broadcasting licenses are currently slated by legislation to expire in February of 2009. This WOULD require passage of legislation in BOTH houses of the US congress and either presidential approval or veto override to change. The NTSC cutoff doesn't apply to converters/receivers used with satellite and cable systems. Cable and satellite providers are allowed to determine how long they are willing to support customers with NTSC only TVs. Cable companies will be allowed (but not required) to continue analog distribution for the convenience of analog "cable ready" TV owners. Demand for external ATSC to NTSC converters hasn't been high enough to support modest priced units Or even widespread availability of expensive units. The same legislation that set the NTSC cutoff provides for a government agency to supply up to two $40 vouchers per household to subsidize the purchase of ATSC to NTSC converters. The agency is supposed to start issuing vouchers in 2008. I wouldn't recommend relying on these vouchers if you are using cable or satellite to get your TV signals. There MAY be means tests to qualify for the vouchers too. The funds earmarked for the vouchers is nowhere near enough to offer two vouchers to EVERY household in the US. Of course any picture you see with an NTSC TV connected to an ATSC to NTSC converter WILL be displayed in SD (480i). |
|
#4
|
|||
|
|||
|
"Richard" wrote in message
news ![]() My local tv station will begin to broadcast HD signal soon, and I got an anolog TV. Do I need to buy some kind of HD adapter/receiver inorder to get the signal? If I don't buy it, can I still be able to get the signal through the analog TV? Thanks http://www.hdtvprimer.com/ |
|
#5
|
|||
|
|||
|
On Fri, 09 Mar 2007 18:57:13 +0000, David Zinck wrote:
However, to receive the extra HD signals, you will need an extra cost set-top receiver, as well as a TV that can properly display the HD signal. You will need an ATSC Tuner somewhere connected to your TV. Either in a PC, VCR, DVD recorder, whatever. You don't need a special TV. You can use one 20 years old if it still works and has the inputs to match the outputs of the device with the ATSC tuner(s) in it. You will see exactly what anyone with a real HDTV will see, only in a lower resolution. It will be a lot clearer than the NTSC broadcast though overall. If/when they are switching from an analog to a *digital* signal, you will need a *digital* set-top receiver, but you should be able to keep your old TV. Yep. Not all digital signals are HD... ATSC allows for many different formats. The most common are plain SD at a low signal rate. HD at a high signal rate. And SD over HD. -- Want the ultimate in free OTA SD/HDTV Recorder? http://mythtv.org http://mysettopbox.tv/knoppmyth.html Usenet alt.video.ptv.mythtv My server http://wesnewell.no-ip.com/cpu.php HD Tivo S3 compared http://wesnewell.no-ip.com/mythtivo.htm |
|
#6
|
|||
|
|||
|
On 3/9/2007 8:45 AM, Richard wrote:
My local tv station will begin to broadcast HD signal soon, and I got an anolog TV. Do I need to buy some kind of HD adapter/receiver inorder to get the signal? If I don't buy it, can I still be able to get the signal through the analog TV? Thanks The advice you got, especially from RobertVA, is excellent. The most basic thing you need to know is that TV stations will all be changing over to digital transmission, instead of the analog transmission that they are using now. When they do that you will need a converter that will receive the digital signals, allow you to select the station you want to watch, and convert it to a signal your TV can understand. You'll also want to know that HD stations broadcast digitally, but digital transmissions don't have to be HD. They can be Standard Definition. The difference is that SD fills your current TV, and HD fills (usually) the newer wide screen TV's. |
|
#7
|
|||
|
|||
|
"David Zinck" wrote in message
news:[email protected] If I understand you correctly, the HD signals will be in *addition* to the regular analog signals. You can keep your old set and everything remains the same. ============================= You understand incorrectly. ALL analog will be shut off in 2 years. ALL transmissions will then be digital. This will include SD DTV and HDTV. ============================= However, to receive the extra HD signals, you will need an extra cost set-top receiver, as well as a TV that can properly display the HD signal. If/when they are switching from an analog to a *digital* signal, you will need a *digital* set-top receiver, but you should be able to keep your old TV. Not all digital signals are HD... ========================= It sounds like you understand some of it, but why does the last half contradict the errors in the first half of you post? |
|
#8
|
|||
|
|||
|
On Sat, 10 Mar 2007 08:09:42 -0800, "Richard C."
ALL analog will be shut off in 2 years. Not true--I will be watching Fox in analog past 2009 because the network affiliate here is low-powered and doesn't even have a digital freq assigned yet. Dave Clary/Corpus Christi, TX http://davidclary.com |
|
#9
|
|||
|
|||
|
wrote in message
... On Sat, 10 Mar 2007 08:09:42 -0800, "Richard C." ALL analog will be shut off in 2 years. Not true--I will be watching Fox in analog past 2009 because the network affiliate here is low-powered and doesn't even have a digital freq assigned yet. Dave Clary/Corpus Christi, TX http://davidclary.com ============================= Good luck with that. |
|
#10
|
|||
|
|||
|
On Sun, 11 Mar 2007 09:05:43 -0700, "Richard C."
wrote: wrote in message .. . On Sat, 10 Mar 2007 08:09:42 -0800, "Richard C." ALL analog will be shut off in 2 years. Not true--I will be watching Fox in analog past 2009 because the network affiliate here is low-powered and doesn't even have a digital freq assigned yet. Dave Clary/Corpus Christi, TX http://davidclary.com ============================= Good luck with that. I'm not happy about it but it is what it is. I wasn't aware of it until Alan F. posted about it awhile back. Certain low-powered stations are exempt. Dave Clary/Corpus Christi, TX http://davidclary.com |
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| USB DVB-T adapter: No Mux 2, A or B | Lorian | UK digital tv | 5 | March 30th 06 01:51 PM |
| Y-adapter for SPDIF? | Ed Chait | Home theater (general) | 1 | October 30th 05 01:49 AM |
| Need an adapter | Roy Smith | High definition TV | 0 | February 4th 05 02:56 PM |
| Standalone - USB Adapter Help | Eli Renfro | Tivo personal television | 5 | November 10th 04 11:20 PM |
| DVI adapter | *[email protected]* | High definition TV | 1 | September 8th 04 03:32 AM |