A Home cinema forum. HomeCinemaBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HomeCinemaBanter forum » Home cinema newsgroups » Home theater (general)
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Plasma not displaying PC correctly



 
 
Thread Tools Display Modes
  #1  
Old February 4th 07, 10:02 PM posted to alt.home-theater.misc
[email protected]
external usenet poster
 
Posts: 3
Default Plasma not displaying PC correctly

I recently setup a Toshiba 50HP66 50" plasma in my office's conference
room in an attempt to use it for presentations instead of a
projector. I hooked up a normal Dell PC (with DVI card and DVI-VGA
dongle) to the PC input on the TV. The resulting picture on the TV is
washed out and blurry. I tried all different resolutions to no
avail. Any thoughts on how to fix? Thanks.

  #2  
Old February 7th 07, 02:48 AM posted to alt.home-theater.misc
Dennis' Newsgroups
external usenet poster
 
Posts: 1
Default Plasma not displaying PC correctly

When using a PC with a fixed pixel display (LCD, DLP, Plasma, DiLA, SRXD)
your best bet is to use the native resolution of the display otherwise the
display's internal processing is going to scale it to its native resolution
and that can end up with very poor results. Matching the scan rate is also
recommended - I would consult the manual for the display for the specs.




Dennis

wrote in message
oups.com...
I recently setup a Toshiba 50HP66 50" plasma in my office's conference
room in an attempt to use it for presentations instead of a
projector. I hooked up a normal Dell PC (with DVI card and DVI-VGA
dongle) to the PC input on the TV. The resulting picture on the TV is
washed out and blurry. I tried all different resolutions to no
avail. Any thoughts on how to fix? Thanks.



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Panasonic wants to zap us with micrwaves? HDTV rear projection using microwave heated plasma. [email protected] High definition TV 1 January 9th 07 01:35 PM
Plasma newbie help -- thanks in advance [email protected] High definition TV 6 October 25th 06 05:17 AM
Plasma Screen Life afiggatt High definition TV 4 November 11th 05 11:49 PM
FS: PLasma tv 50' asking $3,500 Make Offer Reverendjcap UK digital tv 6 January 10th 04 12:39 AM


All times are GMT +1. The time now is 11:19 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright ©2004-2021 HomeCinemaBanter.
The comments are property of their posters.