![]() |
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
one of these...
http://images.channeladvisor.com/Sel...ages/2/3RY.jpg that's suitable for video and has 1x RCA male to 2x RCA Male ? thanks |
|
#2
|
|||
|
|||
|
"SoWeezy" wrote in message ... one of these... http://images.channeladvisor.com/Sel...ages/2/3RY.jpg that's suitable for video and has 1x RCA male to 2x RCA Male ? thanks No, but wouldn't a pair of gender-benders like these help? http://www.audio-discounters.com/a-401pg.html Graham. %Profound_observation% |
|
#3
|
|||
|
|||
|
Try here
http://www.maplin.co.uk/module.aspx?...4059&doy=23m11 Paul H "SoWeezy" wrote in message ... one of these... http://images.channeladvisor.com/Sel...ages/2/3RY.jpg that's suitable for video and has 1x RCA male to 2x RCA Male ? thanks |
|
#4
|
|||
|
|||
|
"Graham" wrote in message ... "SoWeezy" wrote in message ... one of these... http://images.channeladvisor.com/Sel...ages/2/3RY.jpg that's suitable for video and has 1x RCA male to 2x RCA Male ? thanks No, but wouldn't a pair of gender-benders like these help? http://www.audio-discounters.com/a-401pg.html The illustration is RCA male to 2 RCA female and the part can be obtained at http://www.cableuniverse.co.uk/catal...oducts_id=1189 JohnT |
|
#5
|
|||
|
|||
|
"SoWeezy" wrote in message ... one of these... http://images.channeladvisor.com/Sel...ages/2/3RY.jpg that's suitable for video and has 1x RCA male to 2x RCA Male ? thanks Maplin, Farnell, any online electronics retailer. |
|
#6
|
|||
|
|||
|
The illustration is RCA male to 2 RCA female
yes, I know, but I want something similar that's 1 male to 2 male or a Y cable would do, I just need male to male as the DVD has female out and the cables from the LCD screens have female ends |
|
#7
|
|||
|
|||
|
Try here
http://www.maplin.co.uk/module.aspx?...4059&doy=23m11 that's the same as the one I gave as an example, as I said, I want 1 male to 2 male thanks |
|
#8
|
|||
|
|||
|
"SoWeezy" wrote in message . uk... Try here http://www.maplin.co.uk/module.aspx?...4059&doy=23m11 that's the same as the one I gave as an example, as I said, I want 1 male to 2 male All you need is http://www.cableuniverse.co.uk/catal...oducts_id=1189 and http://www.cableuniverse.co.uk/catal...oducts_id=1413 I very much doubt if an adapter such as you describe can be obtained anywhere. JohnT |
|
#9
|
|||
|
|||
|
In message , SoWeezy
wrote one of these... http://images.channeladvisor.com/Sel...ages/2/3RY.jpg that's suitable for video and has 1x RCA male to 2x RCA Male ? You are unlikely to find one that is guaranteed for video. Splitting one video into two this crude way could present two 75 ohm terminations on a the single video output. Is your equipment capable of driving into a double terminated load and/or can the receiving equipment tolerate a reduced signal level and still provide acceptable results? -- Alan news2006 {at} amac {dot} f2s {dot} com |
|
#10
|
|||
|
|||
|
Is your equipment capable of driving into a double terminated load and/or
can the receiving equipment tolerate a reduced signal level and still provide acceptable results? spec for the DVD player (Centurion CENDVD1) video 1.0vp-p frequency response (DVD) 20Hz - 20kHz Signal to noise ratio 90dba the LCD screens are Necvox FD-6569, I can't find any spec on them HTH ? |
|
| Thread Tools | |
| Display Modes | |
|
|