Best Resolution and Scan freq for Mits 65813

Hello,

I'm trying to get the best resolution for my Mits 65813 from my ATI 9600
pro. I'm using powerstrip and have had luck with 720 x 480 but I can't seem
to get a resolution above that to work properly. Any suggestions?

Thanks

Hey Jim,

just boughtthis unit, getting it tomorrow (how much did you pay ?) I also
have a radeon and look forward to your answers about this.

Jeff

"Jim" wrote in message
news:vZWUb.108732$U%[email protected]_s03...
Hello,

I'm trying to get the best resolution for my Mits 65813 from my ATI 9600
pro. I'm using powerstrip and have had luck with 720 x 480 but I can't
seem
to get a resolution above that to work properly. Any suggestions?

Thanks

Which input are you using on the set? If you are using the VGA input it is
limited to 640 x 480.

Leonard Caillouet

$4200 total - a very good TV in my opinion - spend the time to do the
convergence (they never do that at the stores or after delivery) - it makes
a big difference.

"Jeff" wrote in message
...
Hey Jim,

just boughtthis unit, getting it tomorrow (how much did you pay ?) I also
have a radeon and look forward to your answers about this.

Jeff

Good question, I'm using the DVI connector (DVI to DVI)

"Leonard Caillouet" wrote in message
news:[email protected]

"Jim" wrote in message
news:vZWUb.108732$U%[email protected]_s03...
Hello,

I'm trying to get the best resolution for my Mits 65813 from my ATI 9600
pro. I'm using powerstrip and have had luck with 720 x 480 but I can't
seem
to get a resolution above that to work properly. Any suggestions?

Thanks

Which input are you using on the set? If you are using the VGA input it
is
limited to 640 x 480.

Leonard Caillouet

I've been playing around with powerstrip for a couple of hours now. I got
it to display 856 x 480. The key seems to be the right drivers for your TV
in WinXP. I tried creating my own but have failed miserably. I used the
Sony GDM 900 so I could have some higher resolutions. It displays at 1920 x
1080 however the refresh rate is wrong at that setting since it tends to
flicker and the image is slightly off. I'll see if I can get any better
drivers from someone else or a recommendation for a standard WinXP driver.

"Jeff" wrote in message
...
Hey Jim,

just boughtthis unit, getting it tomorrow (how much did you pay ?) I also
have a radeon and look forward to your answers about this.

Jeff