Question for Canadians on Star Choice

What mode do you use on the Star Choice receiver? 0000 or 1080i or
720p or?????

"Tom Woodman" wrote in
:

What mode do you use on the Star Choice receiver? 0000 or
1080i or 720p or?????

I use 1080i for HD and override to 480p for SD. My TV handles this
automatically.

--
Dave Oldridge+
ICQ 1800667

Sony CRT HD - I run mine in "0000" setting via component cables for
both HD/SD

Where do you make that choice? (Motorola DSR500) Thanks!

--
Best Wishes,
Richard Harison
wrote in message
oups.com...

Sony CRT HD - I run mine in "0000" setting via component cables for
both HD/SD




----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

There is a door behind the "StarChoice" label on the front right.
To the left of the USB port is a red button. Pushing this will change
the mode (Mode is displayed) "0000" means native mode

Thank you

--
Best Wishes,
Richard
wrote in message
ups.com...

There is a door behind the "StarChoice" label on the front right.
To the left of the USB port is a red button. Pushing this will change
the mode (Mode is displayed) "0000" means native mode




----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

I knew that. That's why my question is asking which mode to use.
wrote in message
ups.com...

There is a door behind the "StarChoice" label on the front right.
To the left of the USB port is a red button. Pushing this will change
the mode (Mode is displayed) "0000" means native mode

DonLogan wrote in
:

good question
does it matter if your tv is 720 or 1080 (mine is 720)?
i run it at 0000 & let the tv convert.
is this right?

I'm not sure if the DSR500 can actually output 720p. It won't do it to my
TV, but then my TV cannot read 720p anyway.

For my TV, I force the output to 1080i and then in the setup menu, set the
SD override to 480p. That works just fine for me. I tried using 1080i for
everything, but I got some aliasing on SD sigs.

--
Dave Oldridge+
ICQ 1800667

On the Sony HD CRT sets, the DRC (for SD signals) allows for 3 settings:
interlaced, progressive, & cinemotion. (3:2 pulldown).
I assume the interlaced is 1080i, but does anyone know whether the progressive
setting is 480p or 720p?

--
Best Wishes,
Richard Harison

"Dave Oldridge" wrote in message
9...
DonLogan wrote in
:

good question
does it matter if your tv is 720 or 1080 (mine is 720)?
i run it at 0000 & let the tv convert.
is this right?

I'm not sure if the DSR500 can actually output 720p. It won't do it to my
TV, but then my TV cannot read 720p anyway.

For my TV, I force the output to 1080i and then in the setup menu, set the
SD override to 480p. That works just fine for me. I tried using 1080i for
everything, but I got some aliasing on SD sigs.

--
Dave Oldridge+
ICQ 1800667



----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

So what does native mode entail? Thanks

--
All the Best
Richard Harison
wrote in message
ups.com...

There is a door behind the "StarChoice" label on the front right.
To the left of the USB port is a red button. Pushing this will change
the mode (Mode is displayed) "0000" means native mode




----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----