TV Link question

Am I right in thinking that the tv link receiver clips around the
coaxial cable in the second location? If so, would I need proper size
co-ax or will the little white lead running from the wallbox to the VCR
be adequate.

And if I wanted to have one in the bedroom which is one section further
down the chain, would the signal work its way back through the junction
box in the second location, or not

cheers
ed

Sorry, I know this has been asked before, but I dont quite get it. It
goes beyond my electrical knowledge.

Feed runs from digibox to playroom into amp, one run then goes into
playroom tv and the other up to the bedroom.

"Ed" wrote in message
oups.com...
Sorry, I know this has been asked before, but I dont quite get it. It
goes beyond my electrical knowledge.

Feed runs from digibox to playroom into amp, one run then goes into
playroom tv and the other up to the bedroom.


You can pass the signal through one TV link only before it reaches the amp
or you can get a special amp and put both links after the amp. Click on the
diagram here http://www.tvlink.co.uk/amplifiers.htm