A Home cinema forum. HomeCinemaBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HomeCinemaBanter forum » Home cinema newsgroups » UK home cinema
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Purchasing a Plasma Screen Questions



 
 
Thread Tools Display Modes
  #1  
Old December 15th 03, 01:52 PM
Bobby Internet
external usenet poster
 
Posts: n/a
Default Purchasing a Plasma Screen Questions

Ok, I have talked the missus round to getting a Plasma this weekend, so I as
long as the bank say "Yes Mr. Internet, we want you take consolidate your
existing lending at a lower interest rate" then I am on...

Anyhoo, been looking at Richer at the Tosh and the Panny, and seems as there
is only a couple of hundred quid in it and I want one with a stand mount
anyway, I think the Panny is getting the cash should it be in stock locally.

The model number is TH42PW5B, so can someone tell me if this is the best way
to plough £2500 into a Plasma or am I missing a trick?

Also, a few questions I have are as follows...

At the moment I have a DVD Player direct into AV2 on my TV and an auto
switching scart box on AV1 for my Sky Box, VCR and XBOX. I also have a Denon
1803. The question is how am I going to wire this all up without Scart
sockets? However, to make this a bit easier, the 1803 does not have any
video cables in or out at the moment, only optical and coaxial cables.

I think I can probably get a scart to S-Video cable from the switcher box to
the plasma and probably upgrade my DV-350 to that Cambridge Audio PAL Prog
Scan and DVD-A player in Richer for £200 and another £100 for the IXOS
component cable, so with the supercare I should be able to get them to do
the lot for £3000.

Finally, am I doing the right thing anyway, or should I wait and see if I
may be able to save some additional cash by waiting for January? TBH, unless
it was about 10% of the overall cost, I don't think I would really care that
much.

Bob




---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.550 / Virus Database: 342 - Release Date: 09/12/2003


  #2  
Old December 15th 03, 01:59 PM
Nige, On a Mission From God............
external usenet poster
 
Posts: n/a
Default


"Bobby Internet" wrote in message
...
Ok, I have talked the missus round to getting a Plasma this weekend, so I

as
long as the bank say "Yes Mr. Internet, we want you take consolidate your
existing lending at a lower interest rate" then I am on...


hehehehe


Anyhoo, been looking at Richer at the Tosh and the Panny, and seems as

there
is only a couple of hundred quid in it and I want one with a stand mount
anyway, I think the Panny is getting the cash should it be in stock

locally.

I wouldn't buy a plasma from RS.


The model number is TH42PW5B, so can someone tell me if this is the best

way
to plough £2500 into a Plasma or am I missing a trick?


Thats an old model & one with a few issues such as flicker etc. I just
bought the Panasonic TH37PA20B for £2700 & the connectivity is much better
than a stanrd panel. It has 3 scart sockets, a prog scan component input &
everything else you need including an onboard tuner.


Also, a few questions I have are as follows...

At the moment I have a DVD Player direct into AV2 on my TV and an auto
switching scart box on AV1 for my Sky Box, VCR and XBOX. I also have a

Denon
1803. The question is how am I going to wire this all up without Scart
sockets? However, to make this a bit easier, the 1803 does not have any
video cables in or out at the moment, only optical and coaxial cables.


See above

I think I can probably get a scart to S-Video cable from the switcher box

to
the plasma and probably upgrade my DV-350 to that Cambridge Audio PAL Prog
Scan and DVD-A player in Richer for £200 and another £100 for the IXOS
component cable, so with the supercare I should be able to get them to do
the lot for £3000.


Might as well buy a newer model for less money!

Finally, am I doing the right thing anyway, or should I wait and see if I
may be able to save some additional cash by waiting for January? TBH,

unless
it was about 10% of the overall cost, I don't think I would really care

that
much.

Bob


No chance of saving, buy one now mate.


  #3  
Old December 15th 03, 02:18 PM
Barry
external usenet poster
 
Posts: n/a
Default

I've been looking around for similar and you can get the 6 series panasonic
for this money. Try here

http://www.nexnix.co.uk It's still saying £2150 + VAT for the TH42PWD6 but
they said it was going up to £2220 + VAT but still better value than a 5
series for £2500 from RS.


"Bobby Internet" wrote in message
...
Ok, I have talked the missus round to getting a Plasma this weekend, so I

as
long as the bank say "Yes Mr. Internet, we want you take consolidate your
existing lending at a lower interest rate" then I am on...

Anyhoo, been looking at Richer at the Tosh and the Panny, and seems as

there
is only a couple of hundred quid in it and I want one with a stand mount
anyway, I think the Panny is getting the cash should it be in stock

locally.

The model number is TH42PW5B, so can someone tell me if this is the best

way
to plough £2500 into a Plasma or am I missing a trick?

Also, a few questions I have are as follows...

At the moment I have a DVD Player direct into AV2 on my TV and an auto
switching scart box on AV1 for my Sky Box, VCR and XBOX. I also have a

Denon
1803. The question is how am I going to wire this all up without Scart
sockets? However, to make this a bit easier, the 1803 does not have any
video cables in or out at the moment, only optical and coaxial cables.

I think I can probably get a scart to S-Video cable from the switcher box

to
the plasma and probably upgrade my DV-350 to that Cambridge Audio PAL Prog
Scan and DVD-A player in Richer for £200 and another £100 for the IXOS
component cable, so with the supercare I should be able to get them to do
the lot for £3000.

Finally, am I doing the right thing anyway, or should I wait and see if I
may be able to save some additional cash by waiting for January? TBH,

unless
it was about 10% of the overall cost, I don't think I would really care

that
much.

Bob




---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.550 / Virus Database: 342 - Release Date: 09/12/2003




---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.551 / Virus Database: 343 - Release Date: 11/12/2003


  #4  
Old December 15th 03, 03:05 PM
Bobby Internet
external usenet poster
 
Posts: n/a
Default

Nige,

Cheers for the reply, where did you pick that Panny up from and how much
more is the 42"? What sort of extended cover did they offer on it? Will I
see it before xmas is the biggie....

Bob


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.550 / Virus Database: 342 - Release Date: 09/12/2003


  #5  
Old December 15th 03, 03:35 PM
Nige, On a Mission From God............
external usenet poster
 
Posts: n/a
Default


"Bobby Internet" wrote in message
...
Nige,

Cheers for the reply, where did you pick that Panny up from and how much
more is the 42"? What sort of extended cover did they offer on it? Will I
see it before xmas is the biggie....

Bob


I got mine from empire in Bradford, I took it with me & they had stock.

Try empire direct?

Nige


  #6  
Old December 15th 03, 03:56 PM
Barry
external usenet poster
 
Posts: n/a
Default

Nige,

I'm a bit concerned about screen burn from those channel logos, have you
noticed anything with the new Panasonic?



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.551 / Virus Database: 343 - Release Date: 11/12/2003


  #7  
Old December 15th 03, 04:04 PM
Nige, On a Mission From God............
external usenet poster
 
Posts: n/a
Default


"Barry" wrote in message
...
Nige,

I'm a bit concerned about screen burn from those channel logos, have you
noticed anything with the new Panasonic?


It's bull**** if you take a few precautions such as lower the (too high
anyway) contrast & don't leave it on one channel for ages. I have had a 3
plasma's now & NEVER got any burn at all, even with cbeebies (one of the
worst) on for four hours+

Go to avforums & read up on the screen burn thing. You'll find you have to
be retarded to shag a plasma with screen burn & in that case you shouldn't
have one anyway!!!

;~)

Nige


  #8  
Old December 15th 03, 07:40 PM
Bobby Internet
external usenet poster
 
Posts: n/a
Default

OK, I am being a bit of a cheapskate, but can I have some opinions on this
please?

http://www.empiredirect.co.uk/produc...-PM4230&clear=

Seems a bit too cheap to me, but I don't need speakers or a tuner...

Bob



  #9  
Old December 15th 03, 07:46 PM
Nath
external usenet poster
 
Posts: n/a
Default

Go to avforums & read up on the screen burn thing. You'll find you have to
be retarded to shag a plasma with screen burn & in that case you shouldn't
have one anyway!!!

;~)

Nige


Leave this image on your Plasma overnight at full contrast :-)

http://nathansilly.012webpages.com/pic.jpg


  #10  
Old December 15th 03, 08:02 PM
Nige, On a Mission From God............
external usenet poster
 
Posts: n/a
Default


"Nath" wrote in message
...
Go to avforums & read up on the screen burn thing. You'll find you have

to
be retarded to shag a plasma with screen burn & in that case you

shouldn't
have one anyway!!!

;~)

Nige


Leave this image on your Plasma overnight at full contrast :-)

http://nathansilly.012webpages.com/pic.jpg



Do it to your rear pro.


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Plasma HDTVs: 3 Basic Questions cchabot High definition TV 6 September 9th 04 12:29 AM
PB6200 Newbie questions mounts, cable hiders, screen, cables connectors paz Home theater (general) 1 September 2nd 04 05:18 AM
Plasma Mounting Questions Charles Middleton UK home cinema 4 November 27th 03 09:03 AM
Newbie plasma questions Darryn Warner UK home cinema 1 November 21st 03 05:20 PM
Plasma TV Question - Screen resolution Paul High definition TV 2 August 22nd 03 02:13 AM


All times are GMT +1. The time now is 04:03 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright ©2004-2021 HomeCinemaBanter.
The comments are property of their posters.