Advice on next TV
 

I've just upgraded from Sky+ to Sky+ HD and installed the new box
today. Everything appears to work OK apart from one all important
thing: the volume buttons on the remote. I cannot change volume or
mute the sound. The only way to do so is using the *old* remote.

After an hour's googling I've still found no solution. Many seem to
suffer a similar problem and the most frequent suggestion made to
their posts is to remove the batteries, hold select for 30 seconds,
and press the Sky button, whereupon the LED is supposed to flash twice
and all will then be OK. That doesn't work for me.

Not that i expect it's relevant, but my eight year old TV is a
Panasonic TX-32LXD52 32" LCD.

Any practical suggestions would be much appreciated please.

--
Terry, East Grinstead, UK

Advice on next TV
 

My slip - that subject heading was intended for a later post! Should
have been
'Sky+ HD Remote volume buttons'

Advice on next TV
 

"Terry Pinnell" wrote in message
...
My slip - that subject heading was intended for a later post! Should
have been
'Sky+ HD Remote volume buttons'


Guessing its a new remote with the new sky+ HD box?
In which case your new remote needs the code for your tv.

Besides working your sky box, the remote is also a kind of 'one 4 all' tv
remote.
i..e It works for most popular tellys, except it just needs to know which
one, so it can send the correct codes to your telly.
e.g. Sony remotes dont work on Panasonic tellys.... different codes.

Try these:

http://help.sky.com/articles/program...ontrol-your-tv


https://m.sky.com/service/helpcentre...uresk yremote

Advice on next TV
 

On Tuesday, August 11, 2015 at 5:18:41 PM UTC+1, wrote:
I've just upgraded from Sky+ to Sky+ HD and installed the new box
today. Everything appears to work OK apart from one all important
thing: the volume buttons on the remote. I cannot change volume or
mute the sound. The only way to do so is using the *old* remote.

After an hour's googling I've still found no solution. Many seem to
suffer a similar problem and the most frequent suggestion made to
their posts is to remove the batteries, hold select for 30 seconds,
and press the Sky button, whereupon the LED is supposed to flash twice
and all will then be OK. That doesn't work for me.

Not that i expect it's relevant, but my eight year old TV is a
Panasonic TX-32LXD52 32" LCD.

Any practical suggestions would be much appreciated please.

--
Terry, East Grinstead, UK

If the op is clever enough to use a computer and pose the question, youd think he would be clever enough to use Google or check the Sky website or check the 'interactive' part of the menu or even use his old Sky+ handset which will work the HD box