|
Mounting flat screen TV on wall and discreet cabling
On 19/01/2015 13:55, Ian Jackson wrote:
In message , "Dave Plowman (News)" writes In article , the dog from that film you saw wrote: never understood why people sometimes mount their tv so high. nobody ever put their crt on a tv stand six foot tall after all - what better level to put a tv than eye level? Remember the BBC investigation into this (many years ago) for 'racks' operators who set the camera exposure etc in a studio, so watch monitors all day. The monitors were positioned slightly below their eye line. I'm not surprised. I would have thought that the natural (and therefore most restful) direction of human vision would be 10 to 15 degrees downwards. It's the angle most of us have been watching TV at since the 1930s. .... 'tis basic ergonomics: the top of a display screen that's used regularly should be no higher than eye height - looking up at something exposes more of the eye's surface and can lead to drying, also leads to strain in neck muscles. This comes from being seated in an office chair with an upright back, so can be relaxed if lounged back on a sofa. |
Mounting flat screen TV on wall and discreet cabling
On Sun, 18 Jan 2015 20:29:28 +0000, Theo Markettos wrote:
In uk.d-i-y David wrote: I can't really fit all the cables prior to mounting because they will be coming through a hole in the wall roughly mid way to the back of the TV and the connections are to one side. Try some short extension cables, or right angle bends. This kind of thing: http://cpc.farnell.com/hama/083010/h...deg/dp/AV21375 That will allow all the cables to hang down somewhere you can access them. Theo Thanks. Looks like that would work. I'm a little wary of the extra junctions, though. I'm coming round to the idea of just cabling every available connection (apart from the ones on the side) with long cables which can be tidied through the chimney and down the back of the components in the fireplace. Have the TV on a high stand then lift on, and accept that any major change will require a lift off/on. Bracket has a quick release so no screws or bolts to mess with. Cheers Dave R -- Windows 8.1 on PCSpecialist box |
Mounting flat screen TV on wall and discreet cabling
On Mon, 19 Jan 2015 13:59:01 +0000, Andy Burns wrote:
. Thanks! Very useful pictures. I note that it looks like a conventional style (MDF?) Hi-Fi cabinet fitted into the opening and that the TV hangs down over the top of the cabinet area concealing the hole behind. As discussed further up thread (apparently to the horror of most) the TV is going quite a bit further up the wall. Apart from the viewing angle being more comfortable for us, this also gives room for the centre speaker of the surround sound 5:1 rig to sit underneath the TV and above the fireplace. Was your fireplace opening that high anyway or did you remove the top to make it larger? Oh, and any pictures of the finished article? That would also be very helpful. Cheers Dave R -- Windows 8.1 on PCSpecialist box |
Mounting flat screen TV on wall and discreet cabling
In article ,
Ian Jackson wrote: Remember the BBC investigation into this (many years ago) for 'racks' operators who set the camera exposure etc in a studio, so watch monitors all day. The monitors were positioned slightly below their eye line. I'm not surprised. I would have thought that the natural (and therefore most restful) direction of human vision would be 10 to 15 degrees downwards. It's the angle most of us have been watching TV at since the 1930s. Or just walking along. ;-) -- *You're never too old to learn something stupid. Dave Plowman London SW To e-mail, change noise into sound. |
Mounting flat screen TV on wall and discreet cabling
In article , Dave Plowman (News)
scribeth thus In article , the dog from that film you saw wrote: never understood why people sometimes mount their tv so high. nobody ever put their crt on a tv stand six foot tall after all - what better level to put a tv than eye level? Remember the BBC investigation into this (many years ago) for 'racks' operators who set the camera exposure etc in a studio, so watch monitors all day. The monitors were positioned slightly below their eye line. I think there was a BBC engineering monograph on the matter, seem to remember it said that it was recommended for the least eyestrain to set the screen some 15 to 20 deg below the viewers eye height... -- Tony Sayer .. |
Mounting flat screen TV on wall and discreet cabling
On Mon, 19 Jan 2015 14:02:00 +0000, Bert Coules wrote:
David, could you not sink a channel in the wall of the fireplace to accommodate the cable run from its central entry point to where the TV's connectors are? Thanks. Last resort as it is all newly plastered and I don't want to start hacking it about. Fortunately, I think I am nearly at a solution combining carious suggestions. Cheers Dave R -- Windows 8.1 on PCSpecialist box |
Mounting flat screen TV on wall and discreet cabling
Last resort as it is all newly plastered and I don't want to start hacking
it about. Ah yes, that's understandable. Good to hear that you've found another solution. |
Mounting flat screen TV on wall and discreet cabling
David wrote:
I note that it looks like a conventional style (MDF?) Hi-Fi cabinet fitted into the opening and that the TV hangs down over the top of the cabinet area concealing the hole behind Yes, that about it. cabinet made from MDF and a few bits of mitred moulding with routed slots for custom glass shelves to take the HTPC, surround amp and centre dialogue speaker with another MDF shelf hidden behind the bottom of the TV, for a WiFi access point, various power bricks, cables etc. http://www.adslpipe.co.uk/pics/the_construction.jpg As discussed further up thread (apparently to the horror of most) the TV is going quite a bit further up the wall. And to my horror in my first reply too .. Was your fireplace opening that high anyway or did you remove the top to make it larger? I knocked about half a dozen shoddy bricks from beneath the lintel, they were mainly held up by will-power and plaster. Oh, and any pictures of the finished article? That would also be very helpful. Not yet unfortunately ... |
Mounting flat screen TV on wall and discreet cabling
People in wheelchairs get neck ache at social events where many people
stand. Bill |
Mounting flat screen TV on wall and discreet cabling
wrote in message ... On 19/01/2015 13:55, Ian Jackson wrote: In message , "Dave Plowman (News)" writes In article , the dog from that film you saw wrote: never understood why people sometimes mount their tv so high. nobody ever put their crt on a tv stand six foot tall after all - what better level to put a tv than eye level? Remember the BBC investigation into this (many years ago) for 'racks' operators who set the camera exposure etc in a studio, so watch monitors all day. The monitors were positioned slightly below their eye line. I'm not surprised. I would have thought that the natural (and therefore most restful) direction of human vision would be 10 to 15 degrees downwards. It's the angle most of us have been watching TV at since the 1930s. ... 'tis basic ergonomics: We'll see... the top of a display screen that's used regularly should be no higher than eye height My monitors on my desktop system are higher than that, the center of the screen vertically is about at eye level. Works fine and I can have it at your level if I want, they are on a proper monitor mount that allows me to change the vertical position trivially. http://www.mwave.com.au/product/lase...r-arms-aa32070 - looking up at something exposes more of the eye's surface I don’t buy that with the small amount higher my monitors are. and can lead to drying, I don’t get any of that. also leads to strain in neck muscles. Or that either. This comes from being seated in an office chair with an upright back, so can be relaxed if lounged back on a sofa. I compute from a deep armchair with my feet up horizontally. |
| All times are GMT +1. The time now is 09:30 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
HomeCinemaBanter.com