HomeCinemaBanter

HomeCinemaBanter (http://www.homecinemabanter.com/index.php)
-   UK digital tv (http://www.homecinemabanter.com/forumdisplay.php?f=5)
-   -   HD From Sutton Coldfield? (http://www.homecinemabanter.com/showthread.php?t=69039)

Lee March 29th 11 10:33 AM

HD From Sutton Coldfield?
 
Do Sutton Coldfield transmitter vary the output on HD trx or did I catch it
under high pressure lift conditions?
Went and bought a margin riser amp for the DAT45 to celebrate,.heh heh,
but it seems weaker..the Humax HD Fox t2 amp 5v supply don`t hack it so
I had to use my old Antiference 1240 psu...might put the original driver
element back in the DAT45 :( ... unless some kind gent can tell me the error
of my ways ...lol.

Thanks.

Lee.




Mark Carver March 29th 11 10:42 AM

HD From Sutton Coldfield?
 
On 29/03/2011 09:33, lee wrote:
Do Sutton Coldfield transmitter vary the output on HD trx or did I catch it
under high pressure lift conditions?
Went and bought a margin riser amp for the DAT45 to celebrate,.heh heh,
but it seems weaker..the Humax HD Fox t2 amp 5v supply don`t hack it so
I had to use my old Antiference 1240 psu...might put the original driver
element back in the DAT45 :( ... unless some kind gent can tell me the error
of my ways ...lol.


Well, there's one error. The HD Mux for the West Midlands currently
comes from Lichfield, not SC. Also the beam is directional, most of the
power only goes south west towards Brum. It moves to SC on Sept 21st,
from that day (DSO 2) it will be high power, and omni-directional.


--
Mark
Please replace invalid and invalid with gmx and net to reply.

www.paras.org.uk

Lee March 29th 11 11:36 AM

HD From Sutton Coldfield?
 

"Mark Carver" wrote in message
...
On 29/03/2011 09:33, lee wrote:
Do Sutton Coldfield transmitter vary the output on HD trx or did I catch
it
under high pressure lift conditions?
Went and bought a margin riser amp for the DAT45 to celebrate,.heh heh,
but it seems weaker..the Humax HD Fox t2 amp 5v supply don`t hack it so
I had to use my old Antiference 1240 psu...might put the original driver
element back in the DAT45 :( ... unless some kind gent can tell me the
error
of my ways ...lol.


Well, there's one error. The HD Mux for the West Midlands currently comes
from Lichfield, not SC. Also the beam is directional, most of the power
only goes south west towards Brum. It moves to SC on Sept 21st, from that
day (DSO 2) it will be high power, and omni-directional.


--
Mark
Please replace invalid and invalid with gmx and net to reply.

www.paras.org.uk


Thanks Mark, I am in s/w brum and have that info already...I basically
wanted
to know if the the power tx was stable or varied ... the rest was waffle
mode ;)

Cheers.

Lee.




All times are GMT +1. The time now is 04:07 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
HomeCinemaBanter.com