|
9200T going for landfill
You might want to avoid the Icecrypt brand too, as I think that is Topfield by another name. Mind you, I also have my own alternative names for Topfield!! "Alan" wrote in message ... The Topfield is not supported by the manufacturer with regards software/firmware. Their last effort at Freeview+ is over a year old, it's as buggy as hell and not a single bug fix in site. It's only third party bug fixes and third party software that make the Topfield usable. It's unlikely that any future boxes from the same manufacturer, under other brand names, will have the same level of functionality and therefore users will be stuck with a box that may not work soon after they purchase it. -- Alan news2009 {at} admac {dot} myzen {dot} co {dot} uk In message , Albert Ross wrote Does any one have any recommendations for a replacement that will still have manufacturers back up a couple of years down the line? Yes I know it can never be guaranteed but surely some must be more caring of their customers than others. http://www.toppy.org.uk/index.php worth a read, though I'm not sure what I'll do when my ever reliable 5800 turns up its toes |
9200T going for landfill
Bill wrote:
In message , Robin writes Bill wrote: Right, that's it, my 9200 is going for landfill. I do hope you are joking about the landfill. There's lots of old [1] folks who need to replace their VCRs. My limited experience is that the PVR9200T fits their needs nicely. I'd take it off you in a flash if you were within a shout of London as I have a queue of old[1] acquaintances. [1] old is of course a moving target = my age + ~20 Only semi joking Robin, It has given me years of good service, hard drive replaced a year ago but otherwise OK. It then started to suffer from some very strange problem where it would record one program but call it something else, sometimes with odd non UK characters in the text. Plus it would have the wrong synopsis for what it had recorded, most weird. Then it went on to have the slow response to the remote problem, this I could live with but NOT with it missing Dr Who!!!!! Interesting to note others seem to have had this problem with Dr Who, your comments have saved it for today, I'll see what it does for the rest of the week. I would not wish to give it to any one, hardly seems fair to give what I feel is a faulty unit to someone else who presumably has little experience of these things. Well, by and large my Sony Freeview HDD recorders have given me sterling service for a number of years. The only downside to these boxen is the single digital tuner. My older Panasonic Freeview DVD recorders have also been OK, but again, only have a single tuner. I'm now holding out for the new round of dual-tuner Freeview HD boxes from the likes of Panasonic and Toshiba. I've always been impressed with Humax kit but it always seems like one box or another needs a firmware update to fix a problem of some sort. My Sony recorders haven't had a firmware update for several years but thus far seem to be soldiering-on without me worrying about them, which of course is why I bought them in the first place. HTH Clem |
9200T going for landfill
"Max Demian" wrote:
"Bill" wrote in message ... In message , Robin writes Bill wrote: Right, that's it, my 9200 is going for landfill. I do hope you are joking about the landfill. There's lots of old [1] folks who need to replace their VCRs. My limited experience is that the PVR9200T fits their needs nicely. I'd take it off you in a flash if you were within a shout of London as I have a queue of old[1] acquaintances. [1] old is of course a moving target = my age + ~20 Only semi joking Robin, It has given me years of good service, hard drive replaced a year ago but otherwise OK. It then started to suffer from some very strange problem where it would record one program but call it something else, sometimes with odd non UK characters in the text. Plus it would have the wrong synopsis for what it had recorded, most weird. Have you tried reformatting the HD for this? When my HD failed while looked for an alternative I put in a smaller disk. This seemed to accentuate filesystem issues, etc. Then after putting on a much much larger disk the problems magically went away. I've not reformatted for over a year. All I get now is the slow down and scheduled recordings tend to disappear after a while. I would say that keeping. The used space below 50% helps keep my Hummy happy. Graham |
9200T going for landfill
When my HD failed while looked for an alternative I put in a smaller
disk. This seemed to accentuate filesystem issues, etc. Then after putting on a much much larger disk the problems magically went away. I've not reformatted for over a year. All I get now is the slow down and scheduled recordings tend to disappear after a while. I would say that keeping. The used space below 50% helps keep my Hummy happy. Interesting you mention scheduled recordings because I've noticed that recently. Never had this problem before but for the last couple of months we've started noticing scheduled recordings just vanish, for no apparent reason. Paul DS. |
9200T going for landfill
"Graham" wrote in message
... "Max Demian" wrote: "Bill" wrote in message ... In message , Robin writes Bill wrote: Right, that's it, my 9200 is going for landfill. I do hope you are joking about the landfill. There's lots of old [1] folks who need to replace their VCRs. My limited experience is that the PVR9200T fits their needs nicely. I'd take it off you in a flash if you were within a shout of London as I have a queue of old[1] acquaintances. [1] old is of course a moving target = my age + ~20 Only semi joking Robin, It has given me years of good service, hard drive replaced a year ago but otherwise OK. It then started to suffer from some very strange problem where it would record one program but call it something else, sometimes with odd non UK characters in the text. Plus it would have the wrong synopsis for what it had recorded, most weird. Have you tried reformatting the HD for this? When my HD failed while looked for an alternative I put in a smaller disk. This seemed to accentuate filesystem issues, etc. Then after putting on a much much larger disk the problems magically went away. I've not reformatted for over a year. All I get now is the slow down and scheduled recordings tend to disappear after a while. I would say that keeping. The used space below 50% helps keep my Hummy happy. Maybe you fitted the wrong kind of HD. The Humax is rather fussy. -- Max Demian |
9200T going for landfill
In article , Bill
writes It then started to suffer from some very strange problem where it would record one program but call it something else, sometimes with odd non UK characters in the text. Plus it would have the wrong synopsis for what it had recorded, most weird. It's probably bad caps in the power supply. 15 mins max to fix it. -- Mike Tomlinson |
9200T going for landfill
We were somewhere around Barstow, on the edge of the desert, when the
drugs began to take hold. I remember Albert Ross saying something like: If I only had Freeview, I think I'd have taken drastic action by now (you know, the sledgehammer kind of action). http://www.youtube.com/watch?v=-AV9IcxM6XA You'd want to keep your feet clear. :) |
9200T going for landfill
"Mike Tomlinson" wrote in message ... It's probably bad caps in the power supply. 15 mins max to fix it. Was this written as a joke? I only ask because - of course - it could be loads of things (including noise on the 5V/12V lines), and it's probably a bit "previous" to say what the fault "probably" is at this stage! :-) SteveT |
9200T going for landfill
The message
from "Steve Thackery" contains these words: "Mike Tomlinson" wrote in message ... It's probably bad caps in the power supply. 15 mins max to fix it. Was this written as a joke? I only ask because - of course - it could be loads of things (including noise on the 5V/12V lines), and it's probably a bit "previous" to say what the fault "probably" is at this stage! :-) "Bad Caps" is a pretty common failure in most electronic kit. It's been the bane of PC motherboards for the past 15 years or so and it's, in this case, "(including noise on the 5V/12V lines)" the most likely cause (the alternative of inductors developing shorted turns is significantly less probable[1]). Although capacitor failure (electrolytic) is not good, it does have the charm that it can _usually_ be spotted by close inspection with the MK1 eyeball (and a magnifying glass to be certain of those that, at first glance, appear ok) and are also about the only component that can be readily replaced by a reasonably competent amateur with moderate soldering skills. Whilst "it could be loads of things", these are, for most of us, beyond our ability to identify and replace (at least not without the specialist SMD desoldering/soldering rig/kit being to hand, along with the skills to use such kit). Mike's "snap diagnosis" has a very high chance of being correct. In any case, he did use the word "probably", suggesting that, if proved true, it was a relatively trivial repair job. If he's wrong, it's unlikely to be economically repairable, so end of story. [1] I'm not totally excluding other causes such as chip faults or other obscure components, it's just even less probable and a waste of time considering them unless you're extremely familiar with the kit and its documented 'stock fault' history. -- Regards, John. Please remove the "ohggcyht" before replying. The address has been munged to reject Spam-bots. |
9200T going for landfill
On Tue, 20 Apr 2010 14:55:16 +0100, Grimly Curmudgeon
wrote: We were somewhere around Barstow, on the edge of the desert, when the drugs began to take hold. I remember Albert Ross saying something like: If I only had Freeview, I think I'd have taken drastic action by now (you know, the sledgehammer kind of action). http://www.youtube.com/watch?v=-AV9IcxM6XA You'd want to keep your feet clear. :) And your chin |
| All times are GMT +1. The time now is 11:02 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
HomeCinemaBanter.com