|
Snap Crackle and Pop
In article ,
John Legon wrote: At 07:52:40 Wed, 18 Nov 2009, charles wrote in article 50bc06f479charl : In article , Bill wrote: I can't see why a masthead amp would have electrolytics on board. i'd expect one - to act as a 'reservoir' for the power. The dc "reservoir" will be in the PSU... and there should be another one at the 'use' end of the cable run. -- From KT24 Using a RISC OS computer running v5.11 |
Snap Crackle and Pop
At 09:23:41 Wed, 18 Nov 2009, charles wrote in article 50bc0f4992charle
: In article , John Legon wrote: At 07:52:40 Wed, 18 Nov 2009, charles wrote in article 50bc06f479charl : In article , Bill wrote: I can't see why a masthead amp would have electrolytics on board. i'd expect one - to act as a 'reservoir' for the power. The dc "reservoir" will be in the PSU... and there should be another one at the 'use' end of the cable run. Well, I'm surprised! It seems that the base bias circuitry can include a low value electrolytic. |
Snap Crackle and Pop
"charles" wrote in message ...
In article , John Legon wrote: At 07:52:40 Wed, 18 Nov 2009, charles wrote in article 50bc06f479charl : In article , Bill wrote: I can't see why a masthead amp would have electrolytics on board. i'd expect one - to act as a 'reservoir' for the power. The dc "reservoir" will be in the PSU... and there should be another one at the 'use' end of the cable run. Well, I'm surprised. It does seem, though, that some masthead amps do use a low value electrolytic in the transistor base bias circuitry. |
Snap Crackle and Pop
Forget it guys,
Many thanks to those of you who tried to help me without resorting to insulting diatribe.. |
Snap Crackle and Pop
Jim said...
Hair dryers, mobiles phones, cars passing by in the street, just about everything you can think of seems to interfere with the signal, mainly the audio, it just chirrups, clicks and generally drives us all barmy. Then again all our mobile phones cause all sorts of things to crackle and pop within the house, not just the telly. My iPhone seems to be the main culprit, makes the clock radio upstairs go bonkers even when my iPhone is downstairs twenty or thirty feet away. Have you checked that all the ring mains circuits in the house have a good earth, from what you say it would seem that the house wiring is acting as a giant aerial, picking up interference and passing this on to the head amp and other appliances. Have you checked the downlead for continuity, it may have suffered wear and damaged the shielding. The digital signal is pretty robust. For a couple of years I was in a basement flat and used one of these: http://www.maplin.co.uk/Module.aspx?ModuleNo=29193 It was hung on the wall about 3-4 feet above ground level and was looking through a narrow gap in a row of houses at Sandy Heath 21 miles away, I used it with several cheap'n cheerful boxes which usually showed about 10-20% signal strength on a good day and never had any problems with interference or breakup. I don't think it's your STB, something is strange with your setup. -- Ken O'Meara http://www.btinternet.com/~unsteadyken/ |
Snap Crackle and Pop
On Wed, 18 Nov 2009 17:48:11 -0000, Jim wrote:
Forget it guys, Many thanks to those of you who tried to help me without resorting to insulting diatribe.. Take the advice then. Seeing as you have already decided to leave your head up your arse (and in all reality you had already decided this before you asked the question), there is not much anyone can do. Goodbye. |
Snap Crackle and Pop
In article , {$mrtickle$}
@nospam.demon.co.uk says... In , "Jim" wrote: Forget it guys, Many thanks to those of you who tried to help me without resorting to insulting diatribe.. We haven't managed to get off square one yet - our hands are tied due to your perplexing refusal to specify your location. I can't really put it more politely than Terry Casey has. :-( Thank you Mike - at least I tried! I suppose that Bill's two word response to the original post summed it all up, really. The whole thing was such an unthinkable mess that it was well nigh impossible to give any sort of meaningful advice and, I notice, that many of the regulars here who are usually only willing to provide virtually instant, helpful, practical advice kept well clear of Jim's mess. However, many people DID attempt to offer advice - but they also needed to ask questions. Jim asks questions - everybody else only expected to provide answers. If Jim would take the time to go through the archives of this group and pick out previous requests from more reasonable people who, unlike Jim, were willing to answer simple requests to clarify their particular problem, he would see for himself what a massive amount of free, professional advice is available here. Of course, he won't. He is convinced that he is right and it doesn't really matter whether he is in the Sea of Tranquility or 'somewhere in England'. He's asking the questions and all he wants are answers. If he doesn't agree with any of the answers, it's not HIS fault ... -- Terry |
Snap Crackle and Pop
Incidentally I intend to investigate a hypothosis shortly. It is that
reflectors longer than 0.5 wavelength and with more than four rods are a sales gimmick. I'll report back. Bill Sounds interesting. What is the allegation re these reflector systems?.. -- Tony Sayer |
Snap Crackle and Pop
Many thanks Ken,
I'll check the downleads..and the earth, sounds very likely, though I'll most likely need the services of an qualified electrician to do that properly I guess. I have such a person in mind.. Jim. "UnsteadyKen" wrote in message m... Jim said... Hair dryers, mobiles phones, cars passing by in the street, just about everything you can think of seems to interfere with the signal, mainly the audio, it just chirrups, clicks and generally drives us all barmy. Then again all our mobile phones cause all sorts of things to crackle and pop within the house, not just the telly. My iPhone seems to be the main culprit, makes the clock radio upstairs go bonkers even when my iPhone is downstairs twenty or thirty feet away. Have you checked that all the ring mains circuits in the house have a good earth, from what you say it would seem that the house wiring is acting as a giant aerial, picking up interference and passing this on to the head amp and other appliances. Have you checked the downlead for continuity, it may have suffered wear and damaged the shielding. The digital signal is pretty robust. For a couple of years I was in a basement flat and used one of these: http://www.maplin.co.uk/Module.aspx?ModuleNo=29193 It was hung on the wall about 3-4 feet above ground level and was looking through a narrow gap in a row of houses at Sandy Heath 21 miles away, I used it with several cheap'n cheerful boxes which usually showed about 10-20% signal strength on a good day and never had any problems with interference or breakup. I don't think it's your STB, something is strange with your setup. -- Ken O'Meara http://www.btinternet.com/~unsteadyken/ |
| All times are GMT +1. The time now is 02:35 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
HomeCinemaBanter.com