|
|
ATSC capture/streaming card for PC?
Hello fellow HDTV/DTV enthusiasts.
I'm currently in the process of evaluating my homebrew DVR options and would like to record my OTA programming. I know that there are quite a few ATSC capture cards out there for this purpose. While capturing this digital signal requires little horsepower (just write bits to disk), I don't currently have a PC capable of decoding the ATSC signals for display on my HD TV. What I was wondering is, since ATSC is just a digital signal stream and since my TV already has the hardware capable of decoding this stream, is there anything out there that just lets me stream this digital signal back from disk, through my RG6 to my ATSC tuner on my TV? To me, the obvious benefits of this would be that a fairly "mature" PC (older machine like a P3 perhaps) could be used successfully as a DVR. I've done some Googling on this but haven't really come up with anything useful (other than multi-thousand dollar hardware meant for professional broadcasters). Any insight into this is appreciated in advance. Thanks! |
ATSC capture/streaming card for PC?
VBOX Cat's Eye 3560 ATSC Terrestrial HDTV Receiver, USB-A-3560
Requires a USB 2 port and Windows. Core Duo processor and SATA 3GB recommended for glitch free recording. An older PC can't hack it, there is too much data to process per second. I have used this with beyondtv for 1.5 years with great results. Beyondtv includes a program listing feature that is indispensable. Any insight into this is appreciated in advance. Thanks! |
ATSC capture/streaming card for PC?
On Jan 21, 4:02 pm, root wrote:
VBOX Cat's Eye 3560 ATSC Terrestrial HDTV Receiver, USB-A-3560 Requires a USB 2 port and Windows. Core Duo processor and SATA 3GB recommended for glitch free recording. An older PC can't hack it, there is too much data to process per second. I have used this with beyondtv for 1.5 years with great results. Beyondtv includes a program listing feature that is indispensable. Any insight into this is appreciated in advance. Thanks! I took a look at this card and it appears to be the same type of card that is widely available (not the type of card I'm searching for). As I mentioned, I am looking for a card that does no decoding (which would require a powerful machine) but rather moves ATSC bits to disk and then out through another RG6 connector at a later point in time, to the Antenna port of my HD set. I'm starting to get the impression that no such device exists... yet. |
ATSC capture/streaming card for PC?
On Mon, 21 Jan 2008 10:57:33 -0800, AggieSawDust wrote:
What I was wondering is, since ATSC is just a digital signal stream and since my TV already has the hardware capable of decoding this stream, is there anything out there that just lets me stream this digital signal back from disk, through my RG6 to my ATSC tuner on my TV? To me, the obvious benefits of this would be that a fairly "mature" PC (older machine like a P3 perhaps) could be used successfully as a DVR. You can buy ATSC transmitters, but it would be much cheaper just to upgrade your PC with a new MB/ram/video and PSU (if needed). By todays standards it doesn't take much to display HD. I'm always upgrading mine and selling the older parts. About to replace a socket 754 A64 3200+ with a newer dual core MB and cpu. I don't know why I do this other than the stuff is cheaper than dirt these days. Before I put the A64 3200+ in it, it had a sempron 2800+ that worked fine too. The new board has onboard video I'll use, so I'll sell the the old MB/ram/video card either locally or on ebay for whatever I can get for it, which probably won't be more than $60 if that. There's all kind of deals on ebay for this older but perfectly capable cpu gear. I wouldn't recommend this, but I've diplayed HD using a Duron 1600 clocked down to 1200MHz using XvMC (in FX200 vid card) in mythtv. And the Duron 1600 clocked at 2GHz worked without XvMC, so you can get by with a slower type cpu if you have to. But today, you shouldn't have to. -- Want the ultimate in free OTA SD/HDTV Recorder? http://mythtv.org My Tivo Experience http://wesnewell.no-ip.com/tivo.htm Tivo HD/S3 compared http://wesnewell.no-ip.com/mythtivo.htm AMD cpu help http://wesnewell.no-ip.com/cpu.php |
ATSC capture/streaming card for PC?
On Mon, 21 Jan 2008 15:02:50 -0700, root wrote:
VBOX Cat's Eye 3560 ATSC Terrestrial HDTV Receiver, USB-A-3560 Requires a USB 2 port and Windows. Core Duo processor and SATA 3GB recommended for glitch free recording. An older PC can't hack it, there is too much data to process per second. I have used this with beyondtv for 1.5 years with great results. Beyondtv includes a program listing feature that is indispensable. He wants to transmit ATSC over rf, not receive it. To receive it he can use an old Air2PC PCI card that cost about $25. I've got 6 of them and they work fine. And for recording, they'd probably work on an old 486. -- Want the ultimate in free OTA SD/HDTV Recorder? http://mythtv.org My Tivo Experience http://wesnewell.no-ip.com/tivo.htm Tivo HD/S3 compared http://wesnewell.no-ip.com/mythtivo.htm AMD cpu help http://wesnewell.no-ip.com/cpu.php |
ATSC capture/streaming card for PC?
On Jan 21, 10:57*am, AggieSawDust wrote:
Hello fellow HDTV/DTV enthusiasts. I'm currently in the process of evaluating my homebrew DVR options and would like to record my OTA programming. *I know that there are quite a few ATSC capture cards out there for this purpose. *While capturing this digital signal requires little horsepower (just write bits to disk), I don't currently have a PC capable of decoding the ATSC signals for display on my HD TV. What I was wondering is, since ATSC is just a digital signal stream and since my TV already has the hardware capable of decoding this stream, is there anything out there that just lets me stream this digital signal back from disk, through my RG6 to my ATSC tuner on my TV? *To me, the obvious benefits of this would be that a fairly "mature" PC (older machine like a P3 perhaps) could be used successfully as a DVR. I've done some Googling on this but haven't really come up with anything useful (other than multi-thousand dollar hardware meant for professional broadcasters). Any insight into this is appreciated in advance. Thanks! Cheaper way to do this and you likely have most of what you need already. PCs don't cost any serious money anymore, at least for what you need for HDTV. I started with a Sempron 2500 3 years ago with a 160 gig drive (you want WAY more than that), an ATI 9200 video card and an ATI HDTV Wonder tuner card and 512 megs of RAM and a DVD DL drive. That machine has morphed into an Athlon XP 3200 with an ATI 9600XT video card, 1 gig RAM and a 500 gig disc. The RF remote control makes the PC very closely resemble a TV. Does it screw up now and then? Yes, but not very often - maybe 2-3% of the time if that. I make more mistakes by forgetting to turn it on though the main TV PC now has a timer start at 7:30 M-TH and noon Fridays so even that is much less Meanwhile the other 2 computers also got HDTV Wonder boards and a few hours a week all 3 are happily recording OTA HD. The vanilla network router runs HD content across the LAN to any of the other PCs though only one has the 50" DLP as a 'monitor'. Bulk storage is done with USB drives. I have 3 500 gig units, a 320 and a 160 and yes, you can play HD content directly off a USB drive with no problems. An hour show shrinks to 42:30 after removing the commercials and the file size varies from 5.5 down to 2.3 gigs for the 42 minutes meaning a 500 gig drive holds around 100 1 hour shows for $110 and of course is re- usable. I wouldn't bother with an ATSC modulator but is has been discussed in the last year so you can check it out. GG |
ATSC capture/streaming card for PC?
On Mon, 21 Jan 2008 14:42:51 -0800, AggieSawDust wrote:
As I mentioned, I am looking for a card that does no decoding (which would require a powerful machine) but rather moves ATSC bits to disk and then out through another RG6 connector at a later point in time, to the Antenna port of my HD set. I'm starting to get the impression that no such device exists... yet. Yes, they've been around for some time. But you really don't want one. Search the web and you can find them. But I doubt you can afford one. 1 - 10 of about 20,900 for 8vsb modulator http://www.advanceddigital.ca/products/dvb/tvb590.php -- Want the ultimate in free OTA SD/HDTV Recorder? http://mythtv.org My Tivo Experience http://wesnewell.no-ip.com/tivo.htm Tivo HD/S3 compared http://wesnewell.no-ip.com/mythtivo.htm AMD cpu help http://wesnewell.no-ip.com/cpu.php |
ATSC capture/streaming card for PC?
Yes, they've been around for some time. But you really don't want one. Search the web and you can find them. But I doubt you can afford one. 1 - 10 of about 20,900 for 8vsb modulator http://www.advanceddigital.ca/products/dvb/tvb590.php Thanks for all the responses. I was already thinking that new PC hardware will definitely be the most economical way to go. However, this could also turn into a fun project. The way I look at this, the incoming signal is already correctly modulated. If all I'm doing is writing that modulated stream of bits to disk, I could output that same, unmodified, signal stream at a later time (time shifted) through an RG6 connection. I wouldn't need to purchase modulating hardware (since the signal is already modulated right?), just something that I could pass that same digital stream out through to get to my TV. Anyway, thanks again for the input. |
ATSC capture/streaming card for PC?
AggieSawDust wrote (in part):
Thanks for all the responses. I was already thinking that new PC hardware will definitely be the most economical way to go. However, this could also turn into a fun project. The way I look at this, the incoming signal is already correctly modulated. Incoming to the RF input on the tuner, yes. If all I'm doing is writing that modulated stream of bits to disk, I could output that same, unmodified, signal stream at a later time (time shifted) through an RG6 connection. I wouldn't need to purchase modulating hardware (since the signal is already modulated right?), just something that I could pass that same digital stream out through to get to my TV. But that isn't what you're doing. The tuner demodulates the signal before passing it to the computer. What you save to the hard drive is not modulated, nor could it be. It is still encoded to the MPEG-2 compression format (for broadcast and cable) but the modulation (8VSB for broadcast, QAM for cable) is stripped off. Normally the bitstream is decoded to uncompressed digital before sending it to the display via a DVI or HDMI connection, or additionally converted to analog for a component connection. That is often done by software on the computer, perhaps with hardware help from the video card, and that requires a fairly fast computer and/or recent video card. An alternative that works very well on older, slower computers is a tuner with it's own decoder and an output independent of the computer's video system. The MyHD MDP-130 does this, but it's nearing the end of its support cycle, and it doesn't play well with some newer computers or operating systems. Windows XP on a single-core 800 MHz or faster processor is ideal. You could probably get away with an even slower processor. A few displays, notably from Toshiba, have had IEEE-1394 ports intended to connect to D-VHS recorders. There is software to make a computer emulate D-VHS and send the still-encoded bitstream to the display, which then does the decoding. Another possibility is a separate box such as the TVIX HD Network Media Player which can accept bitstreams in various encoding formats over Ethernet from a computer and decode them to HDMI or component. I've had no experience with them (though I'm tempted) and don't suggest that TVIX is the best choice, just the one I thought of first. The only consumer-oriented ATSC modulator I've ever heard of worked only with a now-obsolete model of Dish Network receiver. For more discussion of that and other ATSC modulators, including a link to a company (DVEO) selling modulators on PCI cards, go he http://www.avsforum.com/avs-vb/showthread.php?t=851974 I couldn't find prices anywhere on DVEO's site. Guess they figure that if you have to ask, . . . Del Mibbler |
ATSC capture/streaming card for PC?
On Jan 22, 9:55*am, AggieSawDust wrote:
Yes, they've been around for some time. But you really don't want one. Search the web and you can find them. But I doubt you can afford one. 1 - 10 of about 20,900 for 8vsb modulator http://www.advanceddigital.ca/products/dvb/tvb590.php Thanks for all the responses. *I was already thinking that new PC hardware will definitely be the most economical way to go. *However, this could also turn into a fun project. *The way I look at this, the incoming signal is already correctly modulated. *If all I'm doing is writing that modulated stream of bits to disk, I could output that same, unmodified, signal stream at a later time (time shifted) through an RG6 connection. *I wouldn't need to purchase modulating hardware (since the signal is already modulated right?), just something that I could pass that same digital stream out through to get to my TV. Anyway, thanks again for the input. The incoming ATSC signal rides on a UHF carrier frequency which the tuner removes and the computer never sees. The MPEG2 data stream saved to disk is at baseband, not UHF, and the TV's antenna input can't use it unless it's modulated back onto an RF carrier frequency. The TV's other inputs (HDMI, S-Video, component, etc) are closer to what the computer handles. I put together a minimal cheap HD system from an old 2.2GHz Dell Dimension 2400 and a Hauppauge WinTV-HVR950 USB tuner. It will record and play back HDTV on the 15" monitor and has a pause mode with the delayed playback function you asked for. It isn't a -good- system but it does work, most of the time. Jim Wilkins |
| All times are GMT +1. The time now is 09:55 AM. |
|
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
HomeCinemaBanter.com