Problems with projector resolution...
 

Hi,

I have an Optoma H30 with the native resolution 800*600. It is able
to handle 480p, 720p and 1080i. I have connected to the projector
via VGA-cable (the best solution on this model) to my computer with
a Nvidia 6600GT. Now, my problem is I cant run 1080i. When I do, I
get the message:

"1920*1080" @ XX Hz Out of range"

and no picture showing. All the other resolutions works fine. How do
I get it to show 1080i-movies? Is this a setting for the computer? I
have tried to manually set the resolution to 800*600 and so on, but
nothing helps. Please help me, all tips are appreciated!

Regards Seb.
--
----------------------------------------------
Posted with NewsLeecher v3.0 Final
* Binary Usenet Leeching Made Easy
* http://www.newsleecher.com/?usenet
----------------------------------------------

Problems with projector resolution...
 

"sebrock" wrote in message
ng.com...
Hi,

I have an Optoma H30 with the native resolution 800*600. It is able
to handle 480p, 720p and 1080i. I have connected to the projector
via VGA-cable (the best solution on this model) to my computer with
a Nvidia 6600GT. Now, my problem is I cant run 1080i. When I do, I
get the message:

"1920*1080" @ XX Hz Out of range"

and no picture showing. All the other resolutions works fine. How do
I get it to show 1080i-movies? Is this a setting for the computer? I
have tried to manually set the resolution to 800*600 and so on, but
nothing helps. Please help me, all tips are appreciated!

Regards Seb.

You are using the wrong input. The "vga" input does not support 1080i,
IIRC.

Leonard

Problems with projector resolution...
 

Then what input supports it?

I was told that of the inputs that this model has VGA should be give
me the best picture quality. These are the available connections,
taken from the users manual. What should I use to get 1080i if not
the VGA???

S-Video Input Connector
Composite Video Input Connector
Component/SCART RGB & Computer (VGA) input
--
----------------------------------------------
Posted with NewsLeecher v3.0 Final
* Binary Usenet Leeching Made Easy
* http://www.newsleecher.com/?usenet
----------------------------------------------

Problems with projector resolution...
 

"sebrock" wrote in message
ng.com...
Then what input supports it?

I was told that of the inputs that this model has VGA should be give
me the best picture quality. These are the available connections,
taken from the users manual. What should I use to get 1080i if not
the VGA???

S-Video Input Connector
Composite Video Input Connector
Component/SCART RGB & Computer (VGA) input

The component input. The VGA input may support higher resolutions but will
not support 1080i, which is interlaced. The higher resolutions available on
the VGA input will only give you a better pix if you can get it to display.
LOL.

Leonard

Problems with projector resolution...
 

So the component will give me as good picture you reckon or what?

tnx!
--
----------------------------------------------
Posted with NewsLeecher v3.0 Final
* Binary Usenet Leeching Made Easy
* http://www.newsleecher.com/?usenet
----------------------------------------------

Problems with projector resolution...
 

"sebrock" wrote in message
ng.com...
So the component will give me as good picture you reckon or what?

It will give you whatever it gives you. You don't have much choice. The
unit is limited to its native resolution and by the quality of the
processing that resamples the input.

Leonard