|
|
"Stan The Man" wrote in message ... This September, Philips will be releasing their 1920x1080 "True HD" sets. Check out the 37PF9830 for example. Around 4000 euro retail here on the continent. Link please http://www.digitaldirectuk.com/produ...p?product_id=9 142 Thanks for the link. For some reason I'd thought this special reference was to a CRT set, but of course its another flat panel. Roger |
On Wed, 24 Aug 2005 10:24:09 +0100, Kennedy McEwen
wrote: After watching an LCD i'm now like this even with some 100 Hz TVs. You need to eat more vegetables then, especially carrots! Sorry, watching TV and healthy eating seem to be mutually exclusive. ;-) The fact that they sell to the unwashed masses means very little in terms of image quality - slow rise time LCD panels without any colour management have been selling in volume too, but the picture quality is complete crap. I think we've already established that the great unwashed will buy substandard products. What I'm saying is that one of the advantages of LCD and 100 Hz TVs IS a noticeable reduction in flicker. If there was no benefit at all I don't think 100 Hz TVs would have been on sale for the last 15 years. I notice the difference. Yes, if you ignore the fact that interlace is already 50% data compression to start with! This has been debated extensively on this group. Not compression, removal. 576i and 1080i have half the temporal resolution of 720p. Coupled with the fact that 720p has double the temporal resolution of 1080i No it doesn't! 720p has exactly the same temporal resolution of 1080i, they both have 50Hz refresh rates. The fact is that 1080i provides additional information in that frame time, in the form of significantly enhanced horizontal resolution and additional vertical resolution through the interlace. 720p will only have the same apparent temporal resolution as 1080i if the 1080i source and display are none progressive. The 1080i field resolution will only be 540 lines though compared to 720 with 720p. 1080i provides half the FIELD rate of 720p. making it the only real choice for any material with movement So all those sports stations that have adopted 720p for it's better motion rendering have got things the wrong way round? What crap - interlace sources have been the format of choice for movement for over half a century. Because it's a convenient form of lossey compression in the analogue world. It's the technology of the 1930's. We've moved on from there. That is exactly the point: nobody would need them - if high quality backwards compatibility were delivered. Whilst that is certainly possible, indeed just as simple to achieve, it isn't what most flat panels provide. Consequently the push for progressive standards alienates about half a century of existing video heritage. I don't follow this. That is clear, from your previous posts. Perhaps you need to consider it more. 1080p production converts nicely to all current and proposed interlaced and progressive standards. Choosing a progressive format for HD broadcast is a natural progression of this. I don't follow how this is in any way less backwards compatible than any other new HD standard. The push for progressive standards is as much about moving forward with technology as the move to high definition. But progressive is NOT a move forward with technology in itself. particularly when the option is between 720p and 1080i. Both formats provide similar vertical resolution in the presence of motion, but the interlaced option provides much higher horizontal resolution in all You keep repeating this but it doesn't make it true. 720p has twice the number of FRAMES as 1080i. This is a flawed logic. 25frames per second, but 50 fields per second, the temporal resolution is exactly the same as a 50 frame per second system. Yes, the full *spatial* resolution is not available simultaneously with the full vertical resolution, but that is no worse than most digital codecs, which drop horizontal and vertical resolution when full temporal resolution is required. 25 frames displayed as 50 half fields. In future both camera and display will be natively progressive. This will show the true limits of a 25 FRAME interlaced system. This no more alienates existing video heritage than any other part of HD. HD may consign much of what you and I are familiar with to a museum, but that's progress for you. If it means that it cannot be rebroadcast without introduction of artefacts than it is not progress, it is anarchy. 1080p production allows easy conversion to all lower standards. To fix on 1080i as a broadcast standard would be to immediately throw away half the information while introducing significant display artifacts. 720p may not have the static resolution of 1080i but wipes the floor with it in all other respects. I really agree that we should be looking to 1080p but as production is moving in that area anyway it would appear logical to adopt the broadcast standard that's the closest technical match. Which is 1080i - simply drop every other line in alternate fields: no interpolative downsampling (with the consequential loss of resolution inherent in all interpolation techniques) required. ....and then try and reconstruct them in the displays memory from the two time different half fields, while the nature of the interlace also causes more artifacts for a given bandwidth at the digital compression stage. 1080i is 25 fields per second. I do not believe this to be enough for a modern broadcast system. With 720p you have a down sampling of the source to from 1080 to 720 at the broadcaster Losing vertical resolution in the process - unlike sampling a 1080i field from a 1080p frame, getting a 720p frame is not an integer spatial division! So how does a 540 line half field system beat a 720 line full field system when the two half fields are taken effectively taken at different points in time, resulting in major interlace artifacts when combined to create 1080 line full frame? With 1080i you first have to throw away half the temporal information, Wrong - and this is the mistake that seems to underpin most of the "progressive is superior to interlace" logic! You do NOT throw away half of the temporal information. What you throw away is the information which requires *BOTH* the full temporal and the full spatial resolution. That is very much *LESS* than a quarter of the information in a real world image - and, given the temporal response of the eye, is even further reduced at the point of viewing. This is why interlace was adopted in the first place - halving the transmission bandwidth resulted in a very small amount of the perceivable information being lost. Half the frames are removed and those that remain are split in to two time separated fields. This not only throws away half the available information but introduces significant interlace artifacts on the what remains. As i've said. Interlace was a 1930's lossy compressions system to solve a problem that not only no longer exists, but actually causes more problems with modern equipment. transmit this at 1080i and then the domestic TV has to reconstruct a 1080 line progressive frame in memory from two 540 line halves of the interlace each taken 1/50 of a second apart. As already explained, that is trivial to accomplish if done correctly. You can't create information that's not there. Some of the best systems apparently average between the two fields and try to guess what should have been present, but at the end of the day, if you have two half FRAMES taken 1/50 sec apart with different content, there is no accurate way to guess what was in the other half of each field. Since these frames may have completely different information (depending on the amount of movement etc) this then leads to an apparent quality reduction. Back to your error - these frames (fields actually) do not have *completely* different information. Even in a high motion content scene, the fast majority of the information is identical in both fields. If the scene is static they'll have the same information. Where there is the slightest movement they will differ. I regularly see this on material that has been captured from conventional TV. There are some very good software de-interlacing routines around but they always add other artifacts. The spatial resolution of a 1080 format is more than double that of a 720 format. Your logic appears to argue that since the temporal resolution of interlace is half that of progressive this cancels out the spatial advantage - but the temporal resolution of progressive is NOT twice that of progressive. The difference between the two lies only in When the interlaced material is converted back to progressive 1080i, effectively contains half the temporal resolution of 720p. Yes in the original 1080i signal there are 50 time separate half fields, but when merged to create the 1080 line picture, this is lost and causes a reduction of visual resolution. Which domestic display is currently available that has a 1080 line vertical resolution? Plenty. The Samsung LW46G15W springs to mind as being one of the newer larger sets: http://www.samsung.com/he/presscente...0000042331.asp Rgds Jonathan |
On Wed, 24 Aug 2005 12:47:34 +0100, Roderick Stewart
wrote: Calling a non-interlaced signal "progressive" is simply a rhetorical use of words to give the impresssion of progress to those who don't understand what is really being described. Oh dear. It's progressive because the scan starts at the top an progresses down a line at a time. It's no worse a description than interlace. This isn't an argument over system names. It could be called Craporama scan for all I care, I still believe (in 720p over 1080i terms) it to be the better system. Unfortunately the ignorant are numerous, so those who extoll their inferior system behind this particular banner may eventually win, and the realism of televison pictures will be the worse for it. No, this is the manufacturers trying to foist the substandard 1080i system over the generally better 720p (or 1080p) system just because it's a larger number. Rgds Jonathan |
In article , Jc wrote:
I'm not sure how simple I have to make this but with a progressive standard it's easy to refresh the screen as many or as few times as you like without introducing additional artifacts. With interlace, any change from the native refresh leads to artifacts. A progressive broadcast on a modern pixel based screen can lead to the highest field rate with no flicker or other artifacts. Maybe we're talking at cross-purposes, but I feel I'm struggling to simplify something too. *Flicker* and *intermittency* (or "jerkiness" of moving objects) are not the same thing. Flicker in a display can be absolutely eliminated, but the rate at which pictures are updated cannot be increased beyond what was properly sampled by the camera, and maintained throughout the system. Rod. |
In article , Jc wrote:
Imagine taking two separate photographs at half resolution, a short time apart of something that's moving and then trying to merge them to get double resolution. The moving object will be in a different position on the second field to the first. That's right. That's the way its been for the past 70 years and despite the fact that you can't easily derive a full resolution still image from it (something television was never designed for), it shows movement far more naturally than a full resolution non-interlaced signal using the same bandwidth. Now imagine rapidly flicking between these two images or showing them merged, before moving on to the next two. I'm not sure why you would want to do that. Why not just show them as they are output from the camera? With a progressive system you just reshow the same FRAME multiple times or in the case of a memory type display such as LCD, just change the pixels as required. Show them as many times as you like, the picture information will only change as often as it was scanned by the camera. Increasing the display scanning rate without increasing the camera scanning rate or the transmission bandwidth will only result in groups of successive displays of the same picture information, and movement will be no less jerky than before. Rod. |
In article , Jc wrote:
Calling a non-interlaced signal "progressive" is simply a rhetorical use of words to give the impresssion of progress to those who don't understand what is really being described. Oh dear. It's progressive because the scan starts at the top an progresses down a line at a time. It's no worse a description than interlace. This isn't an argument over system names. It could be called Craporama scan for all I care, I still believe (in 720p over 1080i terms) it to be the better system. Unfortunately names can sell things to the masses. I couldn't comment on 1080i versus 720p because I haven't had the opportunity to make this comparison, but if either emerges as a "winner" it won't be technical considerations that decide the matter. Rod. |
On Wed, 24 Aug 2005 22:30:45 +0100, Roderick Stewart
wrote: Maybe we're talking at cross-purposes, but I feel I'm struggling to simplify something too. *Flicker* and *intermittency* (or "jerkiness" of moving objects) are not the same thing. Flicker in a display can be absolutely eliminated, but the rate at which pictures are updated cannot be increased beyond what was properly sampled by the camera, and maintained throughout the system. I understand the broadcast world be moving to progressive production technology. That's ideally 1080p50 with 50 full frames per second. My point was that with a progressive standard it's easier to reshow the same frame multiple times for higher refresh rates without motion or other artifacts to eliminate flicker. On pixel based displays such as LCD, flicker is not an issue but smooth motion still is. In this case 50 frames per second would again appear to be better than 25. Rgds Jonathan |
On Wed, 24 Aug 2005 22:30:45 +0100, Roderick Stewart
wrote: That's right. That's the way its been for the past 70 years and despite the fact that you can't easily derive a full resolution still image from it (something television was never designed for), it shows movement far more naturally than a full resolution non-interlaced signal using the same bandwidth. But deriving a full resolution image is what you need to do on any large progressive display. The common interlaced standards have half the frame rate of the progressive standards, this worse for movement in this case. Now imagine rapidly flicking between these two images or showing them merged, before moving on to the next two. I'm not sure why you would want to do that. Why not just show them as they are output from the camera? Because it's the only way to increase the display refresh rate for a given broadcast rate. On a progressive or memory based screen the two half images have to be merged for display. Rgds Jonathan |
On Wed, 24 Aug 2005 22:45:30 +0100, Roderick Stewart
wrote: Unfortunately names can sell things to the masses. I couldn't comment on 1080i versus 720p because I haven't had the opportunity to make this comparison, but if either emerges as a "winner" it won't be technical considerations that decide the matter. I certainly have to agree here... Rgds Jonathan |
|
| All times are GMT +1. The time now is 09:52 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
HomeCinemaBanter.com