Samsung 20 in LCD TV Setting up problem
 

Hi all,
I have just bought a 20in Samsung LDC TV
Model: LW20M21C C
Code: LW20M21CX/XEU

It has a very good picture!
when I set it up I removed the single scart cable from the old TV end only
plus the power cable and aerial.
on setting it up and storing the channels etc, it seems that when I want to
use my VCR or Sky box the TV does not automatically switch input.
I have to use the remote menu and re set the TV to AV1 for the DVD and AV2
for Sky!
I thought the purpose of the scart was to select this,
can anyone shed any info on this please,
Mick.

In article , Mick Cant says...
Hi all,
I have just bought a 20in Samsung LDC TV
Model: LW20M21C C
Code: LW20M21CX/XEU

It has a very good picture!
when I set it up I removed the single scart cable from the old TV end only
plus the power cable and aerial.
on setting it up and storing the channels etc, it seems that when I want to
use my VCR or Sky box the TV does not automatically switch input.
I have to use the remote menu and re set the TV to AV1 for the DVD and AV2
for Sky!
I thought the purpose of the scart was to select this,
can anyone shed any info on this please,
Mick.

Is there anything in the setup menus to enable SCART switching?


--
Conor

"Of all the things I've lost, I miss my mind the most." O.Osbourne.

Hi thanks for replying, no there is no mention except to use a scart between
DVD/VCR and the TV.



"Conor" wrote in message
t...
In article , Mick Cant says...
Hi all,
I have just bought a 20in Samsung LDC TV
Model: LW20M21C C
Code: LW20M21CX/XEU

It has a very good picture!
when I set it up I removed the single scart cable from the old TV end
only
plus the power cable and aerial.
on setting it up and storing the channels etc, it seems that when I want
to
use my VCR or Sky box the TV does not automatically switch input.
I have to use the remote menu and re set the TV to AV1 for the DVD and
AV2
for Sky!
I thought the purpose of the scart was to select this,
can anyone shed any info on this please,
Mick.

Is there anything in the setup menus to enable SCART switching?


--
Conor

"Of all the things I've lost, I miss my mind the most." O.Osbourne.

Solved it(after reading there site "question and answer page" by removing
the scart from the TV, retuning then re fitted the scart and all ok,
thanks Mick.


"Mick Cant" wrote in message
...
Hi all,
I have just bought a 20in Samsung LDC TV
Model: LW20M21C C
Code: LW20M21CX/XEU

It has a very good picture!
when I set it up I removed the single scart cable from the old TV end only
plus the power cable and aerial.
on setting it up and storing the channels etc, it seems that when I want
to
use my VCR or Sky box the TV does not automatically switch input.
I have to use the remote menu and re set the TV to AV1 for the DVD and
AV2
for Sky!
I thought the purpose of the scart was to select this,
can anyone shed any info on this please,
Mick.