|
Sony TV - problem with default switch-on
Some elderly friends have recently bought a Sony KV32FX68 and I volunteered
to set it up for them. The problem is that each time I switch on, either from stand-by or the on-off on the front, it defaults to AV3. This happens even if I use a numbered button on the remote to switch on. I've checked the menu settings, which seem OK, although the manual doesn't help much. Any advice would be most welcome. Many thanks, Ian |
"Ian F." wrote in message ... Some elderly friends have recently bought a Sony KV32FX68 and I volunteered to set it up for them. The problem is that each time I switch on, either from stand-by or the on-off on the front, it defaults to AV3. This happens even if I use a numbered button on the remote to switch on. I've checked the menu settings, which seem OK, although the manual doesn't help much. Any advice would be most welcome. is there something connected to av3? if so it might be sending a voltage signal forcing the tv to switch -- Gareth. Quote of the day.... Nostradamus? - sounds like a rock group to me! |
"the dog from that film you saw"
wrote in message is there something connected to av3? if so it might be sending a voltage signal forcing the tv to switch I'm pretty sure there is, yes - they have a VCR, Sky box and a DVD! What do you reckon I should do? Ian |
"Ian F." wrote in message ... "the dog from that film you saw" wrote in message is there something connected to av3? if so it might be sending a voltage signal forcing the tv to switch I'm pretty sure there is, yes - they have a VCR, Sky box and a DVD! What do you reckon I should do? don't have the item in question turned on - leave it in standby. maybe they never switch their items into standby. -- Gareth. Quote of the day.... Nostradamus? - sounds like a rock group to me! |
"the dog from that film you saw"
wrote in message don't have the item in question turned on - leave it in standby. maybe they never switch their items into standby. No, I did check that - all the other kit was off. Ian |
"Ian F." wrote in message ... "the dog from that film you saw" wrote in message don't have the item in question turned on - leave it in standby. maybe they never switch their items into standby. No, I did check that - all the other kit was off. Ian Unplug everything from AV3. If it still switches on AV3 (it may remember what program it last was) then the TV has a fault. If not then one of the boxes is holding on. |
"R. Mark Clayton" wrote in message
... Unplug everything from AV3. If it still switches on AV3 (it may remember what program it last was) then the TV has a fault. If not then one of the boxes is holding on. Thanks Mark and Gareth. Ian |
| All times are GMT +1. The time now is 07:12 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
HomeCinemaBanter.com