I didn't realize that my inquiry might not be appropriate in this group. I
also didn't realize that there are some other groups I could pose my question
in -- thanks for pointing them out. My thinking in posting my question in this
group was that since the DMT-1000 is slaved off of my Monterey 55 IRD that
perhaps some other TVRO user might have had the same experience I have had.

Subject: 4:3 vs 16:9 screen format on a DMT-1000 DVB FTA receiver
From: "BoBaFett" Spammersget a life.
Date: 9/29/03 9:35 AM Eastern Daylight Time
Message-id:

This group seems to mainly talk about Analog C/Ku TVRO and there are some
people who get off on yelling at you for posting off topic. I suggest
going to www.satforums.com You will most likely find someone there who has
a solution for this problem.


"Jschmuhl" wrote in message
...
My DMT-1000 receiver puts out a 16:9 screen format picture regardless of
what
screen format (4:3 or 16:9) I select on the receiver's System Setting Page
in
the Menu. This is noticeable by the vertical squeeze imparted on all
channels
when input into a Philips DVD 985 recorder (set to either 4:3 Pan & Scan
or 4:3
Letterbox picture modes) and viewed on a conventional 4:3 monitor. I
cannot
get a full screen 4:3 screen format picture from the receiver. On the
otherhand, when I input the same signal from the receiver into a VCR I do
see a
full screen 4:3 screen format picture (although the red "Wide" indicator
is lit
on my Panasonic AG-1980 VCR). Any thoughts/ideas about this (and how to
correct it) are most appreciated.

I have found that the satforums.com site is much more helpful for DVB
related questions. Not that this group is against it but it has alot more
DVB users.


"Jschmuhl" wrote in message
...
I didn't realize that my inquiry might not be appropriate in this group.
I
also didn't realize that there are some other groups I could pose my
question
in -- thanks for pointing them out. My thinking in posting my question in
this
group was that since the DMT-1000 is slaved off of my Monterey 55 IRD that
perhaps some other TVRO user might have had the same experience I have
had.

Subject: 4:3 vs 16:9 screen format on a DMT-1000 DVB FTA receiver
From: "BoBaFett" Spammersget a life.
Date: 9/29/03 9:35 AM Eastern Daylight Time
Message-id:

This group seems to mainly talk about Analog C/Ku TVRO and there are some
people who get off on yelling at you for posting off topic. I suggest
going to www.satforums.com You will most likely find someone there who
has
a solution for this problem.


"Jschmuhl" wrote in message
...
My DMT-1000 receiver puts out a 16:9 screen format picture regardless
of
what
screen format (4:3 or 16:9) I select on the receiver's System Setting
Page
in
the Menu. This is noticeable by the vertical squeeze imparted on all
channels
when input into a Philips DVD 985 recorder (set to either 4:3 Pan &
Scan
or 4:3
Letterbox picture modes) and viewed on a conventional 4:3 monitor. I
cannot
get a full screen 4:3 screen format picture from the receiver. On the
otherhand, when I input the same signal from the receiver into a VCR I
do
see a
full screen 4:3 screen format picture (although the red "Wide"
indicator
is lit
on my Panasonic AG-1980 VCR). Any thoughts/ideas about this (and how
to
correct it) are most appreciated.

I have found that the satforums.com site is much more helpful for DVB
related questions. Not that this group is against it but it has alot more
DVB users.


"Jschmuhl" wrote in message
...
I didn't realize that my inquiry might not be appropriate in this group.
I
also didn't realize that there are some other groups I could pose my
question
in -- thanks for pointing them out. My thinking in posting my question in
this
group was that since the DMT-1000 is slaved off of my Monterey 55 IRD that
perhaps some other TVRO user might have had the same experience I have
had.

Subject: 4:3 vs 16:9 screen format on a DMT-1000 DVB FTA receiver
From: "BoBaFett" Spammersget a life.
Date: 9/29/03 9:35 AM Eastern Daylight Time
Message-id:

This group seems to mainly talk about Analog C/Ku TVRO and there are some
people who get off on yelling at you for posting off topic. I suggest
going to www.satforums.com You will most likely find someone there who
has
a solution for this problem.


"Jschmuhl" wrote in message
...
My DMT-1000 receiver puts out a 16:9 screen format picture regardless
of
what
screen format (4:3 or 16:9) I select on the receiver's System Setting
Page
in
the Menu. This is noticeable by the vertical squeeze imparted on all
channels
when input into a Philips DVD 985 recorder (set to either 4:3 Pan &
Scan
or 4:3
Letterbox picture modes) and viewed on a conventional 4:3 monitor. I
cannot
get a full screen 4:3 screen format picture from the receiver. On the
otherhand, when I input the same signal from the receiver into a VCR I
do
see a
full screen 4:3 screen format picture (although the red "Wide"
indicator
is lit
on my Panasonic AG-1980 VCR). Any thoughts/ideas about this (and how
to
correct it) are most appreciated.

On Mon, 29 Sep 2003, it was written:
This group seems to mainly talk about Analog C/Ku TVRO and there are some
people who get off on yelling at you for posting off topic. I suggest
going to www.satforums.com You will most likely find someone there who has
a solution for this problem.

There's also a group called something like "alt.video.satellite.mpeg2-dvb", but
not very many people visit it.

I used to have a working DMT-1000 (power supply board fried itself), but never
had that problem.

"Jschmuhl" wrote in message
...
My DMT-1000 receiver puts out a 16:9 screen format picture regardless of
what
screen format (4:3 or 16:9) I select on the receiver's System Setting Page
in
the Menu. This is noticeable by the vertical squeeze imparted on all
channels
when input into a Philips DVD 985 recorder (set to either 4:3 Pan & Scan
or 4:3
Letterbox picture modes) and viewed on a conventional 4:3 monitor. I
cannot
get a full screen 4:3 screen format picture from the receiver. On the
otherhand, when I input the same signal from the receiver into a VCR I do
see a
full screen 4:3 screen format picture (although the red "Wide" indicator
is lit
on my Panasonic AG-1980 VCR). Any thoughts/ideas about this (and how to
correct it) are most appreciated.

On Mon, 29 Sep 2003, it was written:
This group seems to mainly talk about Analog C/Ku TVRO and there are some
people who get off on yelling at you for posting off topic. I suggest
going to www.satforums.com You will most likely find someone there who has
a solution for this problem.

There's also a group called something like "alt.video.satellite.mpeg2-dvb", but
not very many people visit it.

I used to have a working DMT-1000 (power supply board fried itself), but never
had that problem.

"Jschmuhl" wrote in message
...
My DMT-1000 receiver puts out a 16:9 screen format picture regardless of
what
screen format (4:3 or 16:9) I select on the receiver's System Setting Page
in
the Menu. This is noticeable by the vertical squeeze imparted on all
channels
when input into a Philips DVD 985 recorder (set to either 4:3 Pan & Scan
or 4:3
Letterbox picture modes) and viewed on a conventional 4:3 monitor. I
cannot
get a full screen 4:3 screen format picture from the receiver. On the
otherhand, when I input the same signal from the receiver into a VCR I do
see a
full screen 4:3 screen format picture (although the red "Wide" indicator
is lit
on my Panasonic AG-1980 VCR). Any thoughts/ideas about this (and how to
correct it) are most appreciated.

Jschmuhl wrote:

I didn't realize that my inquiry might not be appropriate in this group. I

Anyone who insinuates that anything related to BUD might be off topic in
this group is off base. This is the only Big 8 group covering BUD, which
includes standard DVB issues. There is a DVB-MPEG-specific group, but it
is not Big 8.
--
"The fear of the Lord is the beginning of wisdom...."
Proverbs 9:10 NIV

Team OS/2 ** Reg. Linux User #211409 ** C/Ku since 1986

Felix Miata *** http://members.ij.net/mrmazda/


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

Jschmuhl wrote:

I didn't realize that my inquiry might not be appropriate in this group. I

Anyone who insinuates that anything related to BUD might be off topic in
this group is off base. This is the only Big 8 group covering BUD, which
includes standard DVB issues. There is a DVB-MPEG-specific group, but it
is not Big 8.
--
"The fear of the Lord is the beginning of wisdom...."
Proverbs 9:10 NIV

Team OS/2 ** Reg. Linux User #211409 ** C/Ku since 1986

Felix Miata *** http://members.ij.net/mrmazda/


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----